Effects of combustion parameters on reforming performance of a steam-methane reformer
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Jae Seong | - |
dc.contributor.author | Seo, Juhyeong | - |
dc.contributor.author | Kim, Ho Young | - |
dc.contributor.author | Chung, Jin Taek | - |
dc.contributor.author | Yoon, Sam S. | - |
dc.date.accessioned | 2021-09-05T22:09:20Z | - |
dc.date.available | 2021-09-05T22:09:20Z | - |
dc.date.created | 2021-06-14 | - |
dc.date.issued | 2013-09 | - |
dc.identifier.issn | 0016-2361 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/102286 | - |
dc.description.abstract | The effects of combustion parameters on the reformer performance were studied in a 1-kW fuel cell reformer. A reformer system was numerically simulated using a simplified two-dimensional axisymmetric model domain with an appropriate user-defined function. The numerical results were compared with experimental data for validation. The fuel ratio, based on the flow rate of methane in the reforming reactor, was varied from 20% to 80%. The equivalence ratio was changed from phi = 0.5 to 1.0. The results indicated that as the fuel ratio increased, the production rates of hydrogen and carbon monoxide increased, although their increase rate reduced. In fact, at the highest heat supply rates, the hydrogen production rate was actually slightly decreased. Simulations showed that the mixture had the highest fuel conversion rates and production rates of reformate gas at certain equivalence ratio and fuel ratio. This finding implies that adjusting the equivalence ratio and fuel ratio can significantly change the reformer characteristics and that the reforming performance can be optimized by adjusting them. (C) 2013 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | WATER-GAS SHIFT | - |
dc.subject | SIMULATION | - |
dc.subject | OPERATION | - |
dc.subject | REACTOR | - |
dc.title | Effects of combustion parameters on reforming performance of a steam-methane reformer | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Ho Young | - |
dc.contributor.affiliatedAuthor | Chung, Jin Taek | - |
dc.contributor.affiliatedAuthor | Yoon, Sam S. | - |
dc.identifier.doi | 10.1016/j.fuel.2013.04.078 | - |
dc.identifier.scopusid | 2-s2.0-84879048039 | - |
dc.identifier.wosid | 000321037600054 | - |
dc.identifier.bibliographicCitation | FUEL, v.111, pp.461 - 471 | - |
dc.relation.isPartOf | FUEL | - |
dc.citation.title | FUEL | - |
dc.citation.volume | 111 | - |
dc.citation.startPage | 461 | - |
dc.citation.endPage | 471 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Energy & Fuels | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Energy & Fuels | - |
dc.relation.journalWebOfScienceCategory | Engineering, Chemical | - |
dc.subject.keywordPlus | WATER-GAS SHIFT | - |
dc.subject.keywordPlus | SIMULATION | - |
dc.subject.keywordPlus | OPERATION | - |
dc.subject.keywordPlus | REACTOR | - |
dc.subject.keywordAuthor | Combustion parameters | - |
dc.subject.keywordAuthor | Fuel ratio | - |
dc.subject.keywordAuthor | Equivalence ratio | - |
dc.subject.keywordAuthor | Fuel cell | - |
dc.subject.keywordAuthor | Reformer | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.