Fabrication of Porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Sung Won | - |
dc.contributor.author | Jung, Hyun-Do | - |
dc.contributor.author | Kang, Min-Ho | - |
dc.contributor.author | Kim, Hyoun-Ee | - |
dc.contributor.author | Koh, Young-Hag | - |
dc.contributor.author | Estrin, Yuri | - |
dc.date.accessioned | 2021-09-05T23:57:33Z | - |
dc.date.available | 2021-09-05T23:57:33Z | - |
dc.date.created | 2021-06-14 | - |
dc.date.issued | 2013-07-01 | - |
dc.identifier.issn | 0928-4931 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/102738 | - |
dc.description.abstract | This paper reports a new approach to fabricating biocompatible porous titanium with controlled pore structure and net-shape. The method is based on using sacrificial Mg particles as space holders to produce compacts that are mechanically stable and machinable. Using magnesium granules and Ti powder, Ti/Mg compacts with transverse rupture strength (similar to 85 MPa) sufficient for machining were fabricated by warm compaction, and a complex-shape Ti scaffold was eventually produced by removal of Mg granules from the net-shape compact. The pores with the average size of 132-262 mu m were well distributed and interconnected. Due to anisotropy and alignment of the pores the compressive strength varied with the direction of compression. In the case of pores aligned with the direction of compression, the compressive strength values (59-280 MPa) high enough for applications in load bearing implants were achieved. To verify the possibility of controlled net-shape, conventional machining process was performed on Ti/Mg compact. Compact with screw shape and porous Ti scaffold with hemispherical cup shape were fabricated by the results. Finally, it was demonstrated by cell tests using MC3T3-E1 cell line that the porous Ti scaffolds fabricated by this technique are biocompatible. (C) 2013 Elsevier B.V. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE BV | - |
dc.subject | METAL IMPLANTS | - |
dc.subject | TI SCAFFOLDS | - |
dc.subject | FOAMS | - |
dc.subject | HOLDER | - |
dc.subject | BONE | - |
dc.title | Fabrication of Porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Koh, Young-Hag | - |
dc.identifier.doi | 10.1016/j.msec.2013.03.011 | - |
dc.identifier.scopusid | 2-s2.0-84876692967 | - |
dc.identifier.wosid | 000319630100044 | - |
dc.identifier.bibliographicCitation | MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, v.33, no.5, pp.2808 - 2815 | - |
dc.relation.isPartOf | MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | - |
dc.citation.title | MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | - |
dc.citation.volume | 33 | - |
dc.citation.number | 5 | - |
dc.citation.startPage | 2808 | - |
dc.citation.endPage | 2815 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Biomaterials | - |
dc.subject.keywordPlus | METAL IMPLANTS | - |
dc.subject.keywordPlus | TI SCAFFOLDS | - |
dc.subject.keywordPlus | FOAMS | - |
dc.subject.keywordPlus | HOLDER | - |
dc.subject.keywordPlus | BONE | - |
dc.subject.keywordAuthor | Titanium | - |
dc.subject.keywordAuthor | Magnesium | - |
dc.subject.keywordAuthor | Porous metal | - |
dc.subject.keywordAuthor | Space holder method | - |
dc.subject.keywordAuthor | Complex shape | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
145 Anam-ro, Seongbuk-gu, Seoul, 02841, Korea+82-2-3290-2963
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.