Energy harvester using PZT nanotubes fabricated by template-assisted method
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jung, Woo-Suk | - |
dc.contributor.author | Do, Young-Ho | - |
dc.contributor.author | Kang, Min-Gyu | - |
dc.contributor.author | Kang, Chong-Yun | - |
dc.date.accessioned | 2021-09-06T00:05:26Z | - |
dc.date.available | 2021-09-06T00:05:26Z | - |
dc.date.created | 2021-06-14 | - |
dc.date.issued | 2013-07 | - |
dc.identifier.issn | 1567-1739 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/102786 | - |
dc.description.abstract | Lead zirconate titanate (PZT) nanotubes fabricated by template-assisted method using sol-gel solution infiltration are applied for energy harvester. To fabricate PZT nanotubes, an anodic aluminum oxide is used for the template, and as-prepared PZT solution dropped on the surface of the AAO is infiltrated by vacuum pump into the pores in the AAO. The template including PZT solution is dried at 80 degrees C for 1 min and dried again at 300 degrees C for 10 min, and then it treated at 650 degrees C for 30 min to anneal PZT and form the expected perovskite phase. The fabricated nanotubes were mixed with PDMS polymer composite and polyimide films coated Pt/Ti were used for electrodes. Finally, it demonstrated that the energy harvester could generate the output power of 37 nW/cm(2). (C) 2013 Elsevier B.V. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER | - |
dc.subject | NANOGENERATOR | - |
dc.subject | GROWTH | - |
dc.title | Energy harvester using PZT nanotubes fabricated by template-assisted method | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kang, Chong-Yun | - |
dc.identifier.doi | 10.1016/j.cap.2013.01.009 | - |
dc.identifier.scopusid | 2-s2.0-84890570734 | - |
dc.identifier.wosid | 000323140300025 | - |
dc.identifier.bibliographicCitation | CURRENT APPLIED PHYSICS, v.13, pp.S131 - S134 | - |
dc.relation.isPartOf | CURRENT APPLIED PHYSICS | - |
dc.citation.title | CURRENT APPLIED PHYSICS | - |
dc.citation.volume | 13 | - |
dc.citation.startPage | S131 | - |
dc.citation.endPage | S134 | - |
dc.type.rims | ART | - |
dc.type.docType | Article; Proceedings Paper | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Physics | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Physics, Applied | - |
dc.subject.keywordPlus | NANOGENERATOR | - |
dc.subject.keywordPlus | GROWTH | - |
dc.subject.keywordAuthor | PbZr0.52Ti0.48O3 | - |
dc.subject.keywordAuthor | Anodic aluminum oxide | - |
dc.subject.keywordAuthor | Nanostructure | - |
dc.subject.keywordAuthor | Piezoelectric | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.