Heat transfer augmentation using a rib-dimple compound cooling technique
- Authors
- Choi, Eun Yeong; Choi, Yong Duck; Lee, Won Suk; Chung, Jin Teak; Kwak, Jae Su
- Issue Date
- 3월-2013
- Publisher
- PERGAMON-ELSEVIER SCIENCE LTD
- Keywords
- Gas turbine blade cooling; Compound cooling; Dimple cooling; Rib turbulated cooling; Internal cooling
- Citation
- APPLIED THERMAL ENGINEERING, v.51, no.1-2, pp.435 - 441
- Indexed
- SCIE
SCOPUS
- Journal Title
- APPLIED THERMAL ENGINEERING
- Volume
- 51
- Number
- 1-2
- Start Page
- 435
- End Page
- 441
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/103897
- DOI
- 10.1016/j.applthermaleng.2012.09.041
- ISSN
- 1359-4311
- Abstract
- Detailed distributions of the heat transfer coefficients in the channel with both angled ribs and dimples were measured using the transient liquid crystal technique. For comparison, heat transfer coefficients for dimpled and angle ribbed channels were also presented. The channel aspect ratio was designed to be 2 and 4 in order to simulate the internal coolant passage of a gas turbine blade. The rib pitch, rib angle, dimple diameter, and dimple center-to-center distance were 6 mm, 60 degrees, 6 mm, and 7.2 mm, respectively. The Reynolds number based on the channel hydraulic diameter ranged between 30,000 and 50,000. Results show that the distribution of heat transfer coefficient was asymmetric due to the secondary flow induced by the angled ribs. Also, dimples fabricated between the ribs increased the heat coefficient with an acceptable increase in pressure drop. Thus, the compound cooling technique with angled rib sand dimples should be considered as a candidate for improving the heat transfer performance of a gas turbine blade internal cooling technique. (C) 2012 Elsevier Ltd. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.