Experimental study on transient response according to variation of rib height at fuel cell plate
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Nam, K.H. | - |
dc.contributor.author | Yun, S.H. | - |
dc.contributor.author | Han, S.H. | - |
dc.contributor.author | Choi, N.H. | - |
dc.contributor.author | Choi, Y.D. | - |
dc.date.accessioned | 2021-09-06T09:59:33Z | - |
dc.date.available | 2021-09-06T09:59:33Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2013 | - |
dc.identifier.issn | 1226-4881 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/105976 | - |
dc.description.abstract | In the present study, using a variation of rib height, the transient response and the performance are investigated. The cell voltage is acquired according to the current density change(0.8A/cm2 to 1.0A/cm 2) under same stoichiometry and relative humidity. The different level of undershoots appeared at the different clamping pressure(1.5MPa and 2.0MPa) and different rib height. At 1.5MPa clamping pressure, rib manufactured cut at 100μm height goes to steady state faster than reference plate and has lower maximum undershoot voltage. But performance is lower than reference plate due to increasing contact resistance. © 2013 The Korean Society of Mechanical Engineers. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | Korean Society of Mechanical Engineers | - |
dc.subject | Clamping devices | - |
dc.subject | Cell voltages | - |
dc.subject | Clamping pressure | - |
dc.subject | Fuel cell plates | - |
dc.subject | GDL | - |
dc.subject | Reference plate | - |
dc.subject | Steady state | - |
dc.subject | Variation of Rib | - |
dc.subject | Transient analysis | - |
dc.title | Experimental study on transient response according to variation of rib height at fuel cell plate | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Choi, Y.D. | - |
dc.identifier.doi | 10.3795/KSME-B.2013.37.11.1009 | - |
dc.identifier.scopusid | 2-s2.0-84898477347 | - |
dc.identifier.bibliographicCitation | Transactions of the Korean Society of Mechanical Engineers, B, v.37, no.11, pp.1009 - 1014 | - |
dc.relation.isPartOf | Transactions of the Korean Society of Mechanical Engineers, B | - |
dc.citation.title | Transactions of the Korean Society of Mechanical Engineers, B | - |
dc.citation.volume | 37 | - |
dc.citation.number | 11 | - |
dc.citation.startPage | 1009 | - |
dc.citation.endPage | 1014 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART001815266 | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordPlus | Clamping devices | - |
dc.subject.keywordPlus | Cell voltages | - |
dc.subject.keywordPlus | Clamping pressure | - |
dc.subject.keywordPlus | Fuel cell plates | - |
dc.subject.keywordPlus | GDL | - |
dc.subject.keywordPlus | Reference plate | - |
dc.subject.keywordPlus | Steady state | - |
dc.subject.keywordPlus | Variation of Rib | - |
dc.subject.keywordPlus | Transient analysis | - |
dc.subject.keywordAuthor | Clamping Pressure | - |
dc.subject.keywordAuthor | GDL | - |
dc.subject.keywordAuthor | Transient Response | - |
dc.subject.keywordAuthor | Variation of Rib | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.