Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Canh Tuan Nguyen | - |
dc.contributor.author | Joo, Hyun-Sung | - |
dc.contributor.author | Moon, Jiho | - |
dc.contributor.author | Lee, Hak-Eun | - |
dc.date.accessioned | 2021-09-06T22:31:32Z | - |
dc.date.available | 2021-09-06T22:31:32Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2012-03 | - |
dc.identifier.issn | 0141-0296 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/108978 | - |
dc.description.abstract | Torsional bracing systems have been used widely in I-girder bridges to increase the flexural-torsional buckling strength and distribute the load to the adjacent girders. To evaluate the required stiffness of the bracing and the flexural-torsional buckling strength of the I-girder with a multiple torsional bracing system, the equivalent continuous torsional bracing concept is often adopted regardless of the type of torsional bracing system. However, a previous study on the I-girder with discrete torsional bracings under uniform bending reported that the equivalent continuous torsional bracing concept has certain limitations on discrete torsional bracing problems and it needs to be investigated for general loading cases. This article presents an analytical solution for the elastic flexural-torsional buckling strength and stiffness requirements of I-girders with discrete torsional bracings under various loading conditions. First, a review was performed of the previous study on the elastic critical buckling moment and torsional stiffness requirement of the I-girder with discrete torsional bracings under uniform bending. This solution was then extended for various loading conditions. From the derived analytical solutions, the equivalent moment factor was proposed for practical engineering purposes and the proposed solutions were verified by comparing them with the results of finite element analysis and those of other previous studies. Finally, non-linear finite element analyses including the effects of the initial imperfection and residual stresses were conducted to examine the inelastic buckling strengths of I-girders with discrete torsional bracings under various loading conditions. The results showed that the buckling curves from the current design specification provide reasonably conservative flexural-torsional buckling strengths of the I-girder with discrete torsional bracings when the proposed elastic solutions are applied to obtain the buckling parameters. (C) 2011 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | WEB DISTORTION | - |
dc.subject | STEEL | - |
dc.subject | BEAMS | - |
dc.title | Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Hak-Eun | - |
dc.identifier.doi | 10.1016/j.engstruct.2011.12.022 | - |
dc.identifier.scopusid | 2-s2.0-84862797522 | - |
dc.identifier.wosid | 000301395200030 | - |
dc.identifier.bibliographicCitation | ENGINEERING STRUCTURES, v.36, pp.337 - 350 | - |
dc.relation.isPartOf | ENGINEERING STRUCTURES | - |
dc.citation.title | ENGINEERING STRUCTURES | - |
dc.citation.volume | 36 | - |
dc.citation.startPage | 337 | - |
dc.citation.endPage | 350 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Civil | - |
dc.subject.keywordPlus | WEB DISTORTION | - |
dc.subject.keywordPlus | STEEL | - |
dc.subject.keywordPlus | BEAMS | - |
dc.subject.keywordAuthor | Flexural-torsional buckling | - |
dc.subject.keywordAuthor | Bifurcation analysis | - |
dc.subject.keywordAuthor | Inelastic buckling | - |
dc.subject.keywordAuthor | Torsional restraint | - |
dc.subject.keywordAuthor | Torsional bracing | - |
dc.subject.keywordAuthor | Stiffness requirement | - |
dc.subject.keywordAuthor | Equivalent moment factor | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.