쾌속 조형 기술을 이용하여 제작된 3본 고정성 보철물의 적합도 평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김지환 | - |
dc.contributor.author | 김기백 | - |
dc.contributor.author | 김재홍 | - |
dc.contributor.author | 김웅철 | - |
dc.contributor.author | 김혜영 | - |
dc.date.accessioned | 2021-09-07T01:05:33Z | - |
dc.date.available | 2021-09-07T01:05:33Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2012 | - |
dc.identifier.issn | 1229-3954 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/109724 | - |
dc.description.abstract | Purpose: The purpose this study was to evaluate the marginal fitness of metal copings fabricated using rapid prototyping method and to compare the fitness with copings by conventional method. Then clinical availability of fixed dental prostheses (FDPs) fabricated using rapid prototyping method shall be confirmed based on marginal fitness. Methods: Ten same cases of3 unit FDPs epoxy models (abutment teeth 14 and 16) were manufactured. Each of ten epoxy models were scanned by 3shape D-700 scanner to be designed by experienced technician, and photopolymer 3 unit FDPs were fabricated using rapid prototyping methodand fabricated using Lost wax technique (LW) with same models. Marginal fitness of 3 unit FDPs were measured by silicone replica technique. T-test of independent sample for statistical analysis was executed with SPSS 12.0K for Windows. ( =.05)Results: Significantly higher mean (SD) marginal fitness (P<.000) were observed in the RP group (95.9 (18.0)compared to the conventionally LW group (80.1 (13.8) . Conclusion: Marginal fitness of LW group showed excellent rather than RP group. However marginal fitness of 3 unit FDPs fabricated by RP method did not get out of clinical allowance value range significantly to allow clinical application. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 대한치과기공학회 | - |
dc.title | 쾌속 조형 기술을 이용하여 제작된 3본 고정성 보철물의 적합도 평가 | - |
dc.title.alternative | Marginal fit evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김지환 | - |
dc.contributor.affiliatedAuthor | 김웅철 | - |
dc.contributor.affiliatedAuthor | 김혜영 | - |
dc.identifier.bibliographicCitation | 대한치과기공학회지, v.34, no.2, pp.105 - 111 | - |
dc.relation.isPartOf | 대한치과기공학회지 | - |
dc.citation.title | 대한치과기공학회지 | - |
dc.citation.volume | 34 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 105 | - |
dc.citation.endPage | 111 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001677213 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.description.journalRegisteredClass | other | - |
dc.subject.keywordAuthor | Marginal fit | - |
dc.subject.keywordAuthor | Rapid prototyping | - |
dc.subject.keywordAuthor | RP | - |
dc.subject.keywordAuthor | CAD/CAM | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.