Ⅳ형 경석고와 경화처리된 Ⅳ형 경석고 그리고 폴리우레탄 수지 치형재의 표면경도와 미세구조 특성의 비교
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이완선 | - |
dc.contributor.author | 김지환 | - |
dc.contributor.author | 유진호 | - |
dc.contributor.author | 김태석 | - |
dc.contributor.author | 김남식 | - |
dc.date.accessioned | 2021-09-07T03:25:06Z | - |
dc.date.available | 2021-09-07T03:25:06Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2012 | - |
dc.identifier.issn | 1229-3954 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/110458 | - |
dc.description.abstract | Purpose: This study compared the surface hardness (Vickers) and microstructural characteristics between a type IV stone with and without die hardening treatment, a polyurethane die material. Methods: Materials used were a type stone(MG Crystal Rock), two die hardeners (Hardening bath, Epox-it),and a polyurethane resin material(Polyluck). Six specimens per group were prepared according to manufacturer’s directions. The prepared specimens were tested by means of hardness test, one-way ANOVA analysis, scanning electron microscopic(SEM) observations and energy dispersive spectroscopic(EDS) analysis. Results: In the hardness test and its statistical analysis, there was no significant difference in the surface hardness between a type stone and type stone with die hardener coating, type stone mixed with an epoxy like material instead of water. In contrast, polyurethane resin material exhibited significantly greater surface hardness than other specimen groups (p<0.05). Conclusion: By considering the results of the hardness test, SEM observations and EDS analysis, although the die hardeners on type stone did not show remarkable improvement in surface hardness, the die hardener coating on the surface of type stone material did show decrease of microporous and improvement of surface defects | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 대한치과기공학회 | - |
dc.title | Ⅳ형 경석고와 경화처리된 Ⅳ형 경석고 그리고 폴리우레탄 수지 치형재의 표면경도와 미세구조 특성의 비교 | - |
dc.title.alternative | A comparison of surface hardness and microstructural characteristics between a type IV stone with and without die hardening treatment, and a polyurethane resin die material | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김지환 | - |
dc.identifier.bibliographicCitation | 대한치과기공학회지, v.34, no.3, pp.227 - 236 | - |
dc.relation.isPartOf | 대한치과기공학회지 | - |
dc.citation.title | 대한치과기공학회지 | - |
dc.citation.volume | 34 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 227 | - |
dc.citation.endPage | 236 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001701846 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.description.journalRegisteredClass | other | - |
dc.subject.keywordAuthor | Gypsum products | - |
dc.subject.keywordAuthor | Die stone | - |
dc.subject.keywordAuthor | Surface hardness | - |
dc.subject.keywordAuthor | EDS Analysis | - |
dc.subject.keywordAuthor | Polyurethane resin material | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.