I 형 축력부재의 잔류응력 패턴과 최대 잔류 응력을 고려한 접선탄성계수식
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이경석 | - |
dc.contributor.author | 김승준 | - |
dc.contributor.author | 최진희 | - |
dc.contributor.author | 강영종 | - |
dc.date.accessioned | 2021-09-07T17:36:57Z | - |
dc.date.available | 2021-09-07T17:36:57Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2011 | - |
dc.identifier.issn | 1738-2424 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/113712 | - |
dc.description.abstract | 보 요소를 사용한 비선형 해석법에는 크게 소성영역법과 탄소성 힌지법, 그리고 개선소성힌지법이 있다. 그 중, 적은 계산량과 단면의 비탄성화의 진전을 고려 할 수 있는 개선 소성 힌지법은 현재 많은 연구자들에 의해 사용되고 있으며, 특히 축력 작용 시 잔류응력으로 인하여 단면이 점진적으로 소성화 되는 과정이 CRC 접선탄성계수로 표현되어 사용되고 있다. 하지만 기존의 식은 최대압축잔류응력을 항복응력의 50%로 가정하고 제한된 형태의 잔류응력 패턴에 대해 국한된 식이므로, I 형 단면의 재료 비선형해석에 대한 적용성에 한계가 있고 이는 유한요소해석 프로그램을 이용하여 기존식의 한계를 확인할 수 있었다. 본 연구에서는 새로운 접선 탄성계수식이 유도되었는데 이 식은 많은 연구자가 다루는 주요한 잔류응력 패턴, 최대 잔류응력의 크기, 단면의 형상 및 하중의 방향을 모두 고려할 수 있는 형태로 유도되었다. 유도된 식은 ABAQUS V6.9를 이용한 비탄성 해석을 통해 검증되었다. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 한국방재학회 | - |
dc.title | I 형 축력부재의 잔류응력 패턴과 최대 잔류 응력을 고려한 접선탄성계수식 | - |
dc.title.alternative | Tangential Modulus Equation of the Steel Axial Member with I-section Considering the Pattern and the Maximum Value of the Residual Stress | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김승준 | - |
dc.contributor.affiliatedAuthor | 강영종 | - |
dc.identifier.bibliographicCitation | 한국방재학회논문집, v.11, no.5, pp.121 - 131 | - |
dc.relation.isPartOf | 한국방재학회논문집 | - |
dc.citation.title | 한국방재학회논문집 | - |
dc.citation.volume | 11 | - |
dc.citation.number | 5 | - |
dc.citation.startPage | 121 | - |
dc.citation.endPage | 131 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001599461 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Gradual yielding | - |
dc.subject.keywordAuthor | Inelastic analysis | - |
dc.subject.keywordAuthor | Refined plastic hinge analysis | - |
dc.subject.keywordAuthor | Residual stress | - |
dc.subject.keywordAuthor | Tangent modulus | - |
dc.subject.keywordAuthor | 점진적 소성화 | - |
dc.subject.keywordAuthor | 비탄성해석 | - |
dc.subject.keywordAuthor | 개선 소성 힌지법 | - |
dc.subject.keywordAuthor | 잔류응력 | - |
dc.subject.keywordAuthor | 접선탄성계수 | - |
dc.subject.keywordAuthor | Gradual yielding | - |
dc.subject.keywordAuthor | Inelastic analysis | - |
dc.subject.keywordAuthor | Refined plastic hinge analysis | - |
dc.subject.keywordAuthor | Residual stress | - |
dc.subject.keywordAuthor | Tangent modulus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.