상용화제의 첨가에 따른 PP/PCL 블렌드와 TPO/PCL 블렌드의 기계적 물성 모폴로지 및 유변학적 물성Effect of Compatibilizers on the Morphological, Mechanical and Rheological Properties of PP/ PCL and TPO/PCL Blends
- Other Titles
- Effect of Compatibilizers on the Morphological, Mechanical and Rheological Properties of PP/ PCL and TPO/PCL Blends
- Authors
- 이윤균; 김우년; 김민수
- Issue Date
- 2011
- Publisher
- 한국화학공학회
- Keywords
- Polymer Blends; Compatibilizer; Mechanical Property; Rheological Property
- Citation
- Korean Chemical Engineering Research(HWAHAK KONGHAK), v.49, no.3, pp.342 - 347
- Indexed
- KCI
- Journal Title
- Korean Chemical Engineering Research(HWAHAK KONGHAK)
- Volume
- 49
- Number
- 3
- Start Page
- 342
- End Page
- 347
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/114495
- ISSN
- 0304-128X
- Abstract
- 본 연구에서는 폴리프로필렌(PP)과 올레핀계 열가소성 엘라스토머(TPO)를 생분해성 고분자인 폴리카프로락톤(PCL)과각각 블렌드할 경우 상용화제의 효과에 대하여 연구하였다. 본 연구에 사용한 TPO는 PP(80 wt%), EPDM(15 wt%) 그리고 Talc(5 wt%) 로 구성된 혼합체이며, 상용화제로는 maleic anhydride grafted polypropylene(PP-g-MAH)와 maleic anhydride grafted styrene-(ethylene-co-butene)-styrene copolymer(SEBS-g-MAH)를 사용하였다. PP/PCL 그리고 TPO/PCL 각각의 블렌드에서, PP-g-MAH 를 상용화제로 첨가한 경우 인장강도가 향상되는 것을 알 수 있었으며, 충격강도의 경우에는 rubber를 포함하고 있는 SEBS-g-MAH를 상용화제로 사용하였을 때 향상되는 것을 알 수 있었다. PP/PCL 블렌드에 PP-g-MAH 상용화제를 첨가한 결과 PCL의 droplet 크기가 감소하는 것을 알 수 있었다. 또한 유변물성 측정결과 상용화제 첨가에 따라 각각 블렌드에서 복합점도 변화가 작음을 알 수 있었는데 이것은 상용화제가 블렌드의 상용성 변화에 미치는 영향이작아 용융점도에 미치는 영향이 미미하기 때문으로 사료된다. 요약하면, 블렌드의 기계적 물성, 모폴로지 및 유변학적 물성 측정 결과 PP/PCL과 TPO/PCL 각각의 블렌드에서 PP-g-MAH 상용화제는 PCL droplet 크기를 감소시켜 인장강도를향상시키는 역할을 하였으며, SEBS-g-MAH 는 충격강도를 향상시키는 보강제로서의 역할을 하는 것을 알 수 있었다.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Chemical and Biological Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.