Noise reduction of a high-speed printing system using optimized gears based on Taguchi's method
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Hak-Kyum | - |
dc.contributor.author | Jeon, Jin-Young | - |
dc.contributor.author | Park, Ji-Youp | - |
dc.contributor.author | Yoon, Seongho | - |
dc.contributor.author | Na, Sungsoo | - |
dc.date.accessioned | 2021-09-07T22:20:01Z | - |
dc.date.available | 2021-09-07T22:20:01Z | - |
dc.date.created | 2021-06-14 | - |
dc.date.issued | 2010-12 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/115163 | - |
dc.description.abstract | To meet the increasing demand for more quiet printers, a noise reduction method is required for high-speed laser beam printing. The driving-gear noise is one of the most important components influencing the noise level in laser beam printers. In this paper, optimized gear designs based on Taguchi's method are presented. The proposed optimized gears are applied to a high-speed laser beam printer. The design parameters for the plastic gear are selected during optimization as follows: a pressure angle of 20 degrees, a helix angle of 20 degrees, a module of 0.5, and a profile coefficient of 1.4/0.2/1.2 (cutter addendum x module / cutter tip radius. module / cutter dedendum x module). Through the Taguchi method, the prominence ratio and loudness in the sense of human hearing range, as well as the sound pressure level (SPL) are also reduced in the present printing system. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | - |
dc.title | Noise reduction of a high-speed printing system using optimized gears based on Taguchi's method | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Na, Sungsoo | - |
dc.identifier.doi | 10.1007/s12206-010-0911-5 | - |
dc.identifier.scopusid | 2-s2.0-78650480872 | - |
dc.identifier.wosid | 000286511500004 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.24, no.12, pp.2383 - 2393 | - |
dc.relation.isPartOf | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.title | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.volume | 24 | - |
dc.citation.number | 12 | - |
dc.citation.startPage | 2383 | - |
dc.citation.endPage | 2393 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART001497576 | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordAuthor | Gear | - |
dc.subject.keywordAuthor | Noise | - |
dc.subject.keywordAuthor | Printer | - |
dc.subject.keywordAuthor | Sound quality | - |
dc.subject.keywordAuthor | Taguchi&apos | - |
dc.subject.keywordAuthor | s method | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.