Fabrication of embedded fine line inductors by constrained sintering and formulation of photoimageable conductive paste
- Authors
- Lee, S. M.; Park, S. D.; Yoo, M. J.; Lee, W. S.; Kang, N. K.; Nahm, S.
- Issue Date
- 3월-2008
- Publisher
- MANEY PUBLISHING
- Keywords
- constrained sintering; photoimageable thick film; photoimageable conductive paste; LTCC; embedded inductor
- Citation
- ADVANCES IN APPLIED CERAMICS, v.107, no.2, pp.96 - 100
- Indexed
- SCIE
SCOPUS
- Journal Title
- ADVANCES IN APPLIED CERAMICS
- Volume
- 107
- Number
- 2
- Start Page
- 96
- End Page
- 100
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/123926
- DOI
- 10.1179/174367608X263322
- ISSN
- 1743-6753
- Abstract
- For miniaturisation and precision of electronic device, the new technologies such as photoimageable thick film process were combined with conventional thick film process, and constrained sintering with near zero shrinkage in the x and y direction has been proposed. In this research, photoimageable conductive paste for forming embedded components via constrained sintering by low temperature cofired ceramic (LTCC) technology was formulated. Afterwards, by optimising paste formulation, formation process of fine line and sintering method, miniaturised LTCC components especially embedded fine line inductors were fabricated and their properties such as line resolution, surface morphology and yield were investigated. As a result, embedded fine line inductors formed by constrained sintering with fine line resolution of 20 mm and yield over 90% were acquired.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.