Effect of Load Combinations on Distortional Behaviors of Simple-Span Steel Box Girder Bridges
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Jeonghwa | - |
dc.contributor.author | Kim, Heesoo | - |
dc.contributor.author | Lee, Keesei | - |
dc.contributor.author | Kang, Young-Jong | - |
dc.date.accessioned | 2022-02-26T16:40:42Z | - |
dc.date.available | 2022-02-26T16:40:42Z | - |
dc.date.created | 2022-02-07 | - |
dc.date.issued | 2021-08 | - |
dc.identifier.issn | 2075-4701 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/137033 | - |
dc.description.abstract | When eccentric live loads are applied on the deck overhang of steel-box girder bridges, torsional moments, comprising pure torsional and distortional moments are generated on the box sections. The torsional moment on the bridge girders distorts the box girder cross-sections, inducing additional normal stress components and causing instability of the box girder sections in severe cases. Hence, it is essential to install intermediate diaphragms in the box sections to minimize distortional behaviors. Although the applied live loads are critical parameters that influence intermediate diaphragm spacings, the effects of live load combinations have rarely been addressed in the design of intermediate diaphragm spacings. Thus, load combinations should be evaluated to design the intermediate diaphragm spacing of the box girder bridges more thoroughly. In this study, the load combination effects on the distortional behavior and adequate intermediate diaphragm spacing were evaluated through a finite element analysis (FEA). Composite rectangular box girder bridges with different cross-sectional aspect ratios (H/B) and spans (L) were analyzed in the parametric study. It was found that the truck load, which represents the concentrated load, significantly influences the distortional warping normal stress, normal stress ratio, and intermediate diaphragm spacing. In addition, the FEA results showed that the controlling load combinations could be varied with the span. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | MDPI | - |
dc.subject | WALLED CURVED BEAMS | - |
dc.subject | DIAPHRAGMS | - |
dc.title | Effect of Load Combinations on Distortional Behaviors of Simple-Span Steel Box Girder Bridges | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kang, Young-Jong | - |
dc.identifier.doi | 10.3390/met11081238 | - |
dc.identifier.scopusid | 2-s2.0-85111748812 | - |
dc.identifier.wosid | 000690444700001 | - |
dc.identifier.bibliographicCitation | METALS, v.11, no.8 | - |
dc.relation.isPartOf | METALS | - |
dc.citation.title | METALS | - |
dc.citation.volume | 11 | - |
dc.citation.number | 8 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | DIAPHRAGMS | - |
dc.subject.keywordPlus | WALLED CURVED BEAMS | - |
dc.subject.keywordAuthor | distortion | - |
dc.subject.keywordAuthor | intermediate diaphragm | - |
dc.subject.keywordAuthor | single span | - |
dc.subject.keywordAuthor | spacing | - |
dc.subject.keywordAuthor | steel-box girder | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.