A Short Review of the Effect of Iron Ore Selection on Mineral Phases of Iron Ore Sinter
- Authors
- Park, Junwoo; Kim, Eunju; Suh, In-kook; Lee, Joonho
- Issue Date
- 1월-2022
- Publisher
- MDPI
- Keywords
- Ironmaking; iron ore; iron ore sinter; silico-ferrite of calcium and aluminum; Rietveld
- Citation
- MINERALS, v.12, no.1
- Indexed
- SCIE
SCOPUS
- Journal Title
- MINERALS
- Volume
- 12
- Number
- 1
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/138945
- DOI
- 10.3390/min12010035
- ISSN
- 2075-163X
- Abstract
- The sintering process is a thermal agglomeration process, and it is accompanied by chemical reactions. In this process, a mixture of iron ore fines, flux, and coal particles is heated to about 1300 degrees C-1480 degrees C in a sinter bed. The strength and reducibility properties of iron ore sinter are obtained by liquid phase sintering. The silico-ferrite of calcium and aluminum (SFCA) is the main bonding phase found in modern iron ore sinters. Since the physicochemical and crystallographic properties of the SFCA are affected by the chemical composition and mineral phases of iron ores, a crystallographic understanding of iron ores and sintered ore is important to enhance the quality of iron ore sinter. Scrap and by-products from steel mills are expected to be used in the iron ore sintering process as recyclable resources, and in such a case, the crystallographic properties of iron ore sinter will be affected using these materials. The objective of this paper is to present a short review on research related to mineral phases and structural properties of iron ore and sintered ore.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.