Effects of Cr and Nb addition on high-temperature tensile properties in austenitic cast steels used for turbo-charger application
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 손석수 | - |
dc.date.accessioned | 2022-04-10T05:40:19Z | - |
dc.date.available | 2022-04-10T05:40:19Z | - |
dc.date.created | 2022-04-08 | - |
dc.date.issued | 2016-11 | - |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/139862 | - |
dc.description.abstract | In automotive turbo-chargers, excellent high-temperature properties are needed for retaining their structures at extremely high temperature of exhausted gas, and thus austenitic cast steels have been actively developed. In this study, high-temperature tensile properties of austenitic cast steels containing different W, Nb, and Cr were interpreted by deformation and fracture mechanisms related with carbides and austenite matrix. Replacement effects of W by Nb or Cr were also investigated because of expensive alloying cost of W. The high-temperature tensile test results revealed that the Cr-added steel containing many M7C3 carbides showed the higher strength than the Nb-added steel containing hard MC carbides. This was because the strength could be enhanced by distributing carbides having slightly lower hardness such as M7C3 carbides in the strengthened matrix as it could hold hard carbides, like in the Cr-added steel. The Cr-added steel (1 wt% W) also showed the higher strength and elongation at 900 degrees C than the basic-composition steel (2 wt% W), which indicated that the partly replacement of W by Cr was successfully achieved. (C) 2016 Elsevier B.V. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.title | Effects of Cr and Nb addition on high-temperature tensile properties in austenitic cast steels used for turbo-charger application | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 손석수 | - |
dc.identifier.doi | 10.1016/j.msea.2016.09.049 | - |
dc.identifier.bibliographicCitation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.677, pp.316 - 324 | - |
dc.relation.isPartOf | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.title | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.volume | 677 | - |
dc.citation.startPage | 316 | - |
dc.citation.endPage | 324 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Austenitic cast steel | - |
dc.subject.keywordAuthor | MC and M7C3 carbides | - |
dc.subject.keywordAuthor | Replacement of W by Nb or Cr | - |
dc.subject.keywordAuthor | Turbo-charger | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.