Dynamic tensile deformation behavior of Zr-based amorphous alloy matrix composites reinforced with tungsten or tantalum fibers
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 손석수 | - |
dc.date.accessioned | 2022-04-10T07:40:31Z | - |
dc.date.available | 2022-04-10T07:40:31Z | - |
dc.date.created | 2022-04-08 | - |
dc.date.issued | 2016-07 | - |
dc.identifier.issn | 1598-9623 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/139873 | - |
dc.description.abstract | Zr-based amorphous alloy matrix composites reinforced with tungsten (W) or tantalum (Ta) continuous fibers were fabricated by liquid pressing process. Their dynamic tensile properties were investigated in relation with microstructures and deformation mechanisms by using a split Hopkinson tension bar. The dynamic tensile test results indicated that the maximum strength of the W-fiber-reinforced composite (757 MPa) was much lower than the quasi-statically measured strength, whereas the Ta-fiber-reinforced composite showed very high maximum strength (2129 MPa). In the W-fiber-reinforced composite, the fracture abruptly occurred in perpendicular to the tensile direction because W fibers did not play a role in blocking cracks propagated from the amorphous matrix, thereby resulting in abrupt fracture within elastic range and consequent low tensile strength. The very high dynamic tensile strength of the Ta-fiber-reinforced composite could be explained by the presence of ductile Ta fibers in terms of mechanisms such as (1) interrupted propagation of cracks initiated in the amorphous matrix, (2) formation of lots of cracks in the amorphous matrix, and (3) sharing of loads and severe deformation (necking) of Ta fibers in cracked regions. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | KOREAN INST METALS MATERIALS | - |
dc.title | Dynamic tensile deformation behavior of Zr-based amorphous alloy matrix composites reinforced with tungsten or tantalum fibers | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 손석수 | - |
dc.identifier.doi | 10.1007/s12540-016-5472-4 | - |
dc.identifier.bibliographicCitation | METALS AND MATERIALS INTERNATIONAL, v.22, no.4, pp.707 - 713 | - |
dc.relation.isPartOf | METALS AND MATERIALS INTERNATIONAL | - |
dc.citation.title | METALS AND MATERIALS INTERNATIONAL | - |
dc.citation.volume | 22 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 707 | - |
dc.citation.endPage | 713 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | amorphous materials | - |
dc.subject.keywordAuthor | composites | - |
dc.subject.keywordAuthor | dynamic tensile deformation | - |
dc.subject.keywordAuthor | fibers | - |
dc.subject.keywordAuthor | split hopkinson tensile bar | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.