Unstart phenomena induced by mass addition and heat release in a model scramjet
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 임성균 | - |
dc.date.accessioned | 2022-04-10T07:40:43Z | - |
dc.date.available | 2022-04-10T07:40:43Z | - |
dc.date.created | 2022-04-08 | - |
dc.date.issued | 2016-06 | - |
dc.identifier.issn | 0022-1120 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/139874 | - |
dc.description.abstract | The unstart phenomena in a model scramjet with a free stream Mach number of 4.5 were investigated at an arc-heated hypersonic wind tunnel. High-speed schlieren imaging and high resonance frequency pressure measurements were used to capture the flow features during the unstart process. Three unstart conditions were tested: (i) a low-enthalpy free stream with mass loading, (ii) a high-enthalpy free stream with mass loading and (iii) a high-enthalpy free stream with mass loading and heat release. It was revealed that the unstart threshold and the time from the onset to the completion of unstart depended strongly on the mass loading rate and the heat exchange. The negative heat addition (cooling) significantly increased the threshold of mass flow rate triggering unstart. The decrement of the mass flow rate threshold for unstart was observed in the presence of heat release by combustion. The observed transient and quasi-steady behaviours of the unstart shockwave system and the jet motion were similar in all of the test conditions. On the other hand, at the lip of inlet model, the unstart shockwave under the cold free stream condition exhibited a relatively steady behaviour while severe oscillatory flow motions of the jet and the unstart shockwave were observed in the combustion-driven | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | CAMBRIDGE UNIV PRESS | - |
dc.title | Unstart phenomena induced by mass addition and heat release in a model scramjet | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 임성균 | - |
dc.identifier.doi | https://doi.org/10.1017/jfm.2016.282 | - |
dc.identifier.bibliographicCitation | JOURNAL OF FLUID MECHANICS, v.797, pp.604 - 629 | - |
dc.relation.isPartOf | JOURNAL OF FLUID MECHANICS | - |
dc.citation.title | JOURNAL OF FLUID MECHANICS | - |
dc.citation.volume | 797 | - |
dc.citation.startPage | 604 | - |
dc.citation.endPage | 629 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.