Effects of finish rolling temperature on inverse fracture occurring during drop weight tear test of API X80 pipeline steels
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 손석수 | - |
dc.date.accessioned | 2022-04-11T14:44:11Z | - |
dc.date.available | 2022-04-11T14:44:11Z | - |
dc.date.created | 2022-04-08 | - |
dc.date.issued | 2012-04 | - |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/140029 | - |
dc.description.abstract | In this study, drop-weight tear tests (DWTT) were conducted on API X80 pipeline steels fabricated with different finish rolling temperatures in order to analyze abnormal fracture appearance, i.e., inverse fracture, occurring in the region impacted by a hammer. Area fractions of fracture modes were measured from fractured DWTT specimens, and the measured data were analyzed in relation to microstructures. DWIT absorbed energy, and strain hardening of the hammer-impacted region. As the finish rolling temperature decreased, the volume fraction of fine-grained acicular ferrite increased, while that of large-grained upper bainite or granular bainite decreased. According to the DWTT results, the absorbed energy tended to increase with increasing volume fraction of acicular ferrite (with decreasing finish rolling temperature). A large area of inverse fracture of cleavage type was found in the hammer-impacted region of the steels fabricated with high finish rolling temperatures, but the area fraction of inverse fracture was reduced in the steels fabricated with low finish rolling temperatures. Since the area fraction of inverse fracture was closely related with strain hardening of the hammer-impacted region, it could be successfully reduced by lowering strain hardening and by promoting th | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.title | Effects of finish rolling temperature on inverse fracture occurring during drop weight tear test of API X80 pipeline steels | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 손석수 | - |
dc.identifier.doi | 10.1016/j.msea.2012.02.019 | - |
dc.identifier.bibliographicCitation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.541, pp.181 - 189 | - |
dc.relation.isPartOf | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.title | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.volume | 541 | - |
dc.citation.startPage | 181 | - |
dc.citation.endPage | 189 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | API X80 pipeline steels | - |
dc.subject.keywordAuthor | Acicular ferrite | - |
dc.subject.keywordAuthor | Drop-weight tear tests | - |
dc.subject.keywordAuthor | Finish rolling temperature | - |
dc.subject.keywordAuthor | Inverse fracture | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.