Effect of Functional Fillers on Tribological Characteristics of Acrylonitrile Butadiene Rubber after High-Pressure Hydrogen Exposures
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, Byeong-Lyul | - |
dc.contributor.author | Jung, Jae Kap | - |
dc.contributor.author | Baek, Un Bong | - |
dc.contributor.author | Choi, Byoung-Ho | - |
dc.date.accessioned | 2022-04-12T08:42:48Z | - |
dc.date.available | 2022-04-12T08:42:48Z | - |
dc.date.created | 2022-04-12 | - |
dc.date.issued | 2022-03 | - |
dc.identifier.issn | 2073-4360 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/140106 | - |
dc.description.abstract | In a high-pressure hydrogen environment, the sealing rubber material is swelled by hydrogen, and the mechanical and tribological properties are reduced, causing various problems in the sealing performance. The focus of this study was the effect of the filler type and content on the tribological characteristics of rubber after exposure to high-pressure hydrogen. Acrylonitrile butadiene rubber specimens were exposed to high-pressure hydrogen at 96.6 MPa, and the change in the amount of wear with time after exposure was observed. The wear test was performed using a pin-on-disc ball tip to measure the amount of wear before and after hydrogen exposure of the materials under fixed revolutions per minute and normal load. Scanning electron microscopy was used to observe the wear track and cross section of the specimen to examine the changes in the wear mechanism after hydrogen exposure and to analyze the wear mechanism for each filler. The results of this study are expected to contribute to the evaluation of the tribological properties of the sealing materials used in hydrogen environments. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | MDPI | - |
dc.subject | O-RING | - |
dc.subject | DECOMPRESSION FAILURE | - |
dc.subject | INDUCED RUPTURE | - |
dc.subject | BEHAVIOR | - |
dc.subject | FRACTURE | - |
dc.subject | WEAR | - |
dc.title | Effect of Functional Fillers on Tribological Characteristics of Acrylonitrile Butadiene Rubber after High-Pressure Hydrogen Exposures | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Choi, Byoung-Ho | - |
dc.identifier.doi | 10.3390/polym14050861 | - |
dc.identifier.scopusid | 2-s2.0-85125593505 | - |
dc.identifier.wosid | 000768083200001 | - |
dc.identifier.bibliographicCitation | POLYMERS, v.14, no.5 | - |
dc.relation.isPartOf | POLYMERS | - |
dc.citation.title | POLYMERS | - |
dc.citation.volume | 14 | - |
dc.citation.number | 5 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Polymer Science | - |
dc.relation.journalWebOfScienceCategory | Polymer Science | - |
dc.subject.keywordPlus | O-RING | - |
dc.subject.keywordPlus | DECOMPRESSION FAILURE | - |
dc.subject.keywordPlus | INDUCED RUPTURE | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | FRACTURE | - |
dc.subject.keywordPlus | WEAR | - |
dc.subject.keywordAuthor | hydrogen | - |
dc.subject.keywordAuthor | acrylonitrile butadiene rubber (NBR) | - |
dc.subject.keywordAuthor | wear | - |
dc.subject.keywordAuthor | functional fillers | - |
dc.subject.keywordAuthor | pin-on-disc test | - |
dc.subject.keywordAuthor | blister | - |
dc.subject.keywordAuthor | micro-pore | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.