Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Khani, Rezvan | - |
dc.contributor.author | Zarei-Hanzaki, A. | - |
dc.contributor.author | Moshiri, A. | - |
dc.contributor.author | Abedi, H. R. | - |
dc.contributor.author | Sohn, Seok Su | - |
dc.date.accessioned | 2022-05-09T14:42:29Z | - |
dc.date.available | 2022-05-09T14:42:29Z | - |
dc.date.created | 2022-05-09 | - |
dc.date.issued | 2022-03 | - |
dc.identifier.issn | 2238-7854 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/140843 | - |
dc.description.abstract | The present study deals with the extraordinary twin formation during compressive deformation of a Fe-37.55Mn-8.5Al-0.6C (wt.%) low-density steel at warm temperature regime (200-600 ?). Despite the conventional opinion regarding the restrictive effect of increasing temperature on the occurrence of deformation twinning, not only the twin boundary fraction did not decrease, but also twinning was encouraged at 400 ? and even 600 ?. This was discussed relying on the occurrence of dynamic strain aging phenomenon, which caused a bump in corresponding hardening rate curves. The medium entropy of the alloy, which made short-range diffusion of solute atoms feasible and facilitated local pinning of the mobile dislocations, provided a proper condition for the occurrence of high temperature strain ageing. Finally, the unbalanced pinning of trailing and leading dislocations influenced on their velocity and caused widening the stacking faults which in-turn could significantly assist deformation twinning at such high deformation temperatures. (C) 2022 The Author(s). Published by Elsevier B.V.& nbsp; | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER | - |
dc.subject | THERMALLY ACTIVATED GLIDE | - |
dc.subject | STACKING-FAULT ENERGY | - |
dc.subject | WORK-HARDENING BEHAVIOR | - |
dc.subject | MEDIUM MN STEEL | - |
dc.subject | INDUCED PLASTICITY | - |
dc.subject | RATE SENSITIVITY | - |
dc.subject | MECHANICAL-PROPERTIES | - |
dc.subject | STAINLESS-STEEL | - |
dc.subject | TEMPERATURE | - |
dc.subject | MICROSTRUCTURE | - |
dc.title | Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Sohn, Seok Su | - |
dc.identifier.doi | 10.1016/j.jmrt.2022.01.057 | - |
dc.identifier.scopusid | 2-s2.0-85124088836 | - |
dc.identifier.wosid | 000779125500001 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.17, pp.1628 - 1641 | - |
dc.relation.isPartOf | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | - |
dc.citation.title | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | - |
dc.citation.volume | 17 | - |
dc.citation.startPage | 1628 | - |
dc.citation.endPage | 1641 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | THERMALLY ACTIVATED GLIDE | - |
dc.subject.keywordPlus | STACKING-FAULT ENERGY | - |
dc.subject.keywordPlus | WORK-HARDENING BEHAVIOR | - |
dc.subject.keywordPlus | MEDIUM MN STEEL | - |
dc.subject.keywordPlus | INDUCED PLASTICITY | - |
dc.subject.keywordPlus | RATE SENSITIVITY | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | STAINLESS-STEEL | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordAuthor | Lightweight steel | - |
dc.subject.keywordAuthor | Medium-entropy alloy | - |
dc.subject.keywordAuthor | Thermomechanical processing | - |
dc.subject.keywordAuthor | Deformation twinning | - |
dc.subject.keywordAuthor | Dynamic strain aging | - |
dc.subject.keywordAuthor | Mechanical properties | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.