Development of strain-hardening geopolymer mortar based on liquid-crystal display (LCD) glass and blast furnace slag
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yoo, Doo-Yeol | - |
dc.contributor.author | Lee, Seung Kyun | - |
dc.contributor.author | You, Ilhwan | - |
dc.contributor.author | Oh, Taekgeun | - |
dc.contributor.author | Lee, Yujin | - |
dc.contributor.author | Zi, Goangseup | - |
dc.date.accessioned | 2022-08-13T19:40:30Z | - |
dc.date.available | 2022-08-13T19:40:30Z | - |
dc.date.created | 2022-08-12 | - |
dc.date.issued | 2022-05-09 | - |
dc.identifier.issn | 0950-0618 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/143065 | - |
dc.description.abstract | In this study, a strain-hardening geopolymer mortar, based on waste liquid-crystal display (LCD) glass and ground granulated blast furnace slag (GGBFS), was first developed by incorporating 2% polyethylene (PE) fibers. The influence of silica sand content on the packing density, porosity, fiber/matrix interfacial bond, compressive strength, and tensile performance of the geopolymer composites was also investigated. The test results indicated that the compressive and tensile strengths of the geopolymer increased with the addition of silica sand and by increasing its content up to a sand-to-binder (S/B) ratio of 1.0, which is related to the increased packing density. The total porosity of the geopolymer was insignificantly influenced by the silica sand (8.5%-9.15%), whereas the air voids and volumes of gel pores and mesopores were effectively decreased due to the addition of silica sand. However, the pseudo strain-hardening capability deteriorated when the silica sand content exceeded a certain value, that is, the S/B ratio of 0.3, causing significantly lower strain capacity and energy. The highest strain energy density of 227 kJ/m(3) was achieved in the geopolymer mortar with the S/B ratio of 0.2, which is approximately 13% higher than that of the geopolymer paste. Both the strain capacity and energy absorption capacity were inversely correlated to the compressive strength, implying that achieving pseudo strain-hardening characteristics is more difficult for (ultra-) high-strength geopolymer composites than for normal-strength composites. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | FIBER-REINFORCED CONCRETE | - |
dc.subject | GREENHOUSE-GAS EMISSION | - |
dc.subject | MECHANICAL-PROPERTIES | - |
dc.subject | FLY-ASH | - |
dc.subject | WASTE GLASS | - |
dc.subject | PORTLAND-CEMENT | - |
dc.subject | HYBRID STEEL | - |
dc.subject | PART 1 | - |
dc.subject | PERFORMANCE | - |
dc.subject | BEHAVIOR | - |
dc.title | Development of strain-hardening geopolymer mortar based on liquid-crystal display (LCD) glass and blast furnace slag | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Zi, Goangseup | - |
dc.identifier.doi | 10.1016/j.conbuildmat.2022.127334 | - |
dc.identifier.scopusid | 2-s2.0-85127325511 | - |
dc.identifier.wosid | 000792128700001 | - |
dc.identifier.bibliographicCitation | CONSTRUCTION AND BUILDING MATERIALS, v.331 | - |
dc.relation.isPartOf | CONSTRUCTION AND BUILDING MATERIALS | - |
dc.citation.title | CONSTRUCTION AND BUILDING MATERIALS | - |
dc.citation.volume | 331 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Construction & Building Technology | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Construction & Building Technology | - |
dc.relation.journalWebOfScienceCategory | Engineering, Civil | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | FIBER-REINFORCED CONCRETE | - |
dc.subject.keywordPlus | GREENHOUSE-GAS EMISSION | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | FLY-ASH | - |
dc.subject.keywordPlus | WASTE GLASS | - |
dc.subject.keywordPlus | PORTLAND-CEMENT | - |
dc.subject.keywordPlus | HYBRID STEEL | - |
dc.subject.keywordPlus | PART 1 | - |
dc.subject.keywordPlus | PERFORMANCE | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordAuthor | Geopolymer | - |
dc.subject.keywordAuthor | Liquid-crystal display glass | - |
dc.subject.keywordAuthor | Slag | - |
dc.subject.keywordAuthor | Silica sand | - |
dc.subject.keywordAuthor | Polyethylene fiber | - |
dc.subject.keywordAuthor | Mechanical properties | - |
dc.subject.keywordAuthor | Pseudo strain-hardening | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.