Phase control of WC-Co hardmetal using additive manufacturing technologies
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Seung Woo | - |
dc.contributor.author | Kim, Yeon Woo | - |
dc.contributor.author | Jang, Kyeong Mi | - |
dc.contributor.author | Lee, Jin Woo | - |
dc.contributor.author | Park, Min-Soo | - |
dc.contributor.author | Koo, Hye Young | - |
dc.contributor.author | Ha, Gook-Hyun | - |
dc.contributor.author | Kang, Yun Chan | - |
dc.date.accessioned | 2022-08-15T04:41:09Z | - |
dc.date.available | 2022-08-15T04:41:09Z | - |
dc.date.created | 2022-08-12 | - |
dc.date.issued | 2022-01 | - |
dc.identifier.issn | 0032-5899 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/143233 | - |
dc.description.abstract | Three-dimensional WC-Co hardmetal samples were fabricated using WC-Co nanopowder via two methods: selective laser melting (SLM) and fused deposition modelling (FDM). The carbon loss and phase transition during processing were controlled to minimise the degradation of mechanical properties of the cemented carbide. The SLM samples were manufactured from granule powder produced via spray drying, whereas the FDM process was carried out on a filament produced via injection moulding. During SLM, carbon loss occurred due to the high energy involved in the process. Owing to carbon loss, the relative density and Rockwell hardness of SLM processed samples were low. To overcome this, a stable WC phase cemented carbide was manufactured via FDM. The density of the sintered FDM samples was improved by increasing the packing density of the filaments. The carbide sintered samples had a relative density of 96.3%, hardness of HRA 89.06 and carbon content of 5.47-5.52 wt-%. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | TAYLOR & FRANCIS LTD | - |
dc.subject | LASER | - |
dc.subject | POWDER | - |
dc.title | Phase control of WC-Co hardmetal using additive manufacturing technologies | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kang, Yun Chan | - |
dc.identifier.doi | 10.1080/00325899.2021.1937868 | - |
dc.identifier.scopusid | 2-s2.0-85107719099 | - |
dc.identifier.wosid | 000659744500001 | - |
dc.identifier.bibliographicCitation | POWDER METALLURGY, v.65, no.1, pp.13 - 21 | - |
dc.relation.isPartOf | POWDER METALLURGY | - |
dc.citation.title | POWDER METALLURGY | - |
dc.citation.volume | 65 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 13 | - |
dc.citation.endPage | 21 | - |
dc.type.rims | ART | - |
dc.type.docType | Review | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | LASER | - |
dc.subject.keywordPlus | POWDER | - |
dc.subject.keywordAuthor | WC-Co hardmetal | - |
dc.subject.keywordAuthor | additive manufacturing | - |
dc.subject.keywordAuthor | nanopowder | - |
dc.subject.keywordAuthor | selective laser melting | - |
dc.subject.keywordAuthor | fused deposition modelling | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.