Rheological Properties and Melt Spinning Application of Controlled-Rheology Polypropylenes via Pilot-Scale Reactive Extrusion
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ji, Ho Suk | - |
dc.contributor.author | Park, Geunyeop | - |
dc.contributor.author | Jung, Hyun Wook | - |
dc.date.accessioned | 2022-09-24T00:40:17Z | - |
dc.date.available | 2022-09-24T00:40:17Z | - |
dc.date.created | 2022-09-23 | - |
dc.date.issued | 2022-08 | - |
dc.identifier.issn | 2073-4360 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/143809 | - |
dc.description.abstract | Based on pilot-scale twin-screw reactive extrusion, the structural and rheological properties of controlled-rheology polypropylenes (CR-PPs) are investigated, where the effects of peroxide content and extrusion conditions such as screw configuration, extrusion temperature, and screw speed are prioritized. The active chain cleavage reaction by a small peroxide content of less than 600 ppm inside the extruder gradually increases the melt index and narrows the molecular weight distribution of CR-PPs, thereby affording favorable properties that are applicable to the fiber spinning process. The mechanical properties of CR-PPs are slightly degraded owing to the generation of unsaturated chain ends during the reactive extrusion, which suppresses crystal growth. Under all extrusion conditions, the chain scission and thermal degradation of polypropylene samples occur actively in the harsh twin-screw extruder compared with those in the mild twin-screw extruder. Finally, it is confirmed that CR-PPs can be suitably applied to the melt-spinning process for staple fiber production, thereby guaranteeing a more stable spinning process window against draw resonance instability. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | MDPI | - |
dc.subject | PEROXIDE-PROMOTED DEGRADATION | - |
dc.subject | SCREW EXTRUDER | - |
dc.subject | SINGLE | - |
dc.subject | POLYOLEFINS | - |
dc.subject | EVOLUTION | - |
dc.subject | BEHAVIOR | - |
dc.title | Rheological Properties and Melt Spinning Application of Controlled-Rheology Polypropylenes via Pilot-Scale Reactive Extrusion | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Jung, Hyun Wook | - |
dc.identifier.doi | 10.3390/polym14153226 | - |
dc.identifier.scopusid | 2-s2.0-85137080550 | - |
dc.identifier.wosid | 000839391100001 | - |
dc.identifier.bibliographicCitation | POLYMERS, v.14, no.15 | - |
dc.relation.isPartOf | POLYMERS | - |
dc.citation.title | POLYMERS | - |
dc.citation.volume | 14 | - |
dc.citation.number | 15 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Polymer Science | - |
dc.relation.journalWebOfScienceCategory | Polymer Science | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | EVOLUTION | - |
dc.subject.keywordPlus | PEROXIDE-PROMOTED DEGRADATION | - |
dc.subject.keywordPlus | POLYOLEFINS | - |
dc.subject.keywordPlus | SCREW EXTRUDER | - |
dc.subject.keywordPlus | SINGLE | - |
dc.subject.keywordAuthor | controlled-rheology polypropylene | - |
dc.subject.keywordAuthor | melt spinning process | - |
dc.subject.keywordAuthor | peroxide-initiated degradation | - |
dc.subject.keywordAuthor | pilot-scale reactive extrusion | - |
dc.subject.keywordAuthor | rheological properties | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.