Interface analysis of ultrathin SiO2 layers between c-Si substrates and phosphorus-doped poly-Si by theoretical surface potential analysis using the injection-dependent lifetime
- Authors
- Choi, Sungjin; Baek, Jimin; Kim, Taejun; Min, Kwan Hong; Jeong, Myeong Sang; Song, Hee-eun; Kang, Min Gu; Kim, Donghwan; Kang, Yoonmook; Lee, Hae-Seok; Myoung, Jae-Min; Park, Sungeun
- Issue Date
- 1월-2021
- Publisher
- WILEY
- Keywords
- lifetime; passivated contact; thin oxide; TOPCon
- Citation
- PROGRESS IN PHOTOVOLTAICS, v.29, no.1, pp.32 - 46
- Indexed
- SCIE
SCOPUS
- Journal Title
- PROGRESS IN PHOTOVOLTAICS
- Volume
- 29
- Number
- 1
- Start Page
- 32
- End Page
- 46
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/50225
- DOI
- 10.1002/pip.3338
- ISSN
- 1062-7995
- Abstract
- Passivated contact structures are often representative of tunnel oxide passivated contact (TOPCon) and polycrystalline silicon on oxide (POLO) solar cells. These passivated contact technologies in silicon solar cells have experienced great strides in efficiency. However, characteristics analysis of poly-Si/SiO2 applied to TOPCon and POLO solar cells as a carrier-selective and passivated contact is still challenging because the silicon oxide film is very thin (<1.5 nm), poly-Si and silicon oxide properties change during thermal treatment for passivation effects, and dopant diffusion from poly-Si layer to the silicon wafer occurs. In this study, the interfacial analysis was performed by applying an algorithm based on the extended Shockley-Read-Hall (SRH) theory to the P-doped poly-Si/SiO2/c-Si structure. Quantitative parameters of the P-doped poly-Si/SiO2/c-Si interface were extracted by fitting the measured and simulated lifetime curves with algorithms, such as D-it (interface trap density) and Q(f) (fixed charge), from which we were able to elucidate the passivation effect of the interface. The interface analysis method using this algorithm is meaningful in that it can quantify the passivation characteristics of TOPCon with very thin silicon oxide film. The interface characteristics were also analyzed using the injection-dependent lifetime after thermal treatment of P-doped poly-Si/SiO2/c-Si samples for passivation effect. After the 850 degrees C thermal treatment, the following best passivation effects were verified, namely, psi(s) = 0.248 eV, D-it = 1.0 x 10(11) cm(-2)center dot eV(-1), Q(f) = 2.4 x 10(12) cm(-2), and J(02) = 370 pA center dot cm(-2). Through the analysis model using carrier lifetime theory, we investigated quantitatively the passivation properties of P-doped poly-Si/SiO2/c-Si.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Materials Science and Engineering > 1. Journal Articles
- Graduate School of Energy and Environment (KU-KIST GREEN SCHOOL) > Department of Energy and Environment > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.