Detailed Information

Cited 5 time in webofscience Cited 5 time in scopus
Metadata Downloads

Improvement of fuel cell performances through the enhanced dispersion of the PTFE binder in electrodes for use in high temperature polymer electrolyte membrane fuel cells

Authors
Lee, Woo JaeLee, Ju SungPark, Hee-YoungPark, Hyun SeoLee, So YoungSong, Kwang HoKim, Hyoung-Juhn
Issue Date
20-11월-2020
Publisher
PERGAMON-ELSEVIER SCIENCE LTD
Keywords
High-temperature polymer electrolyte membrane fuel cell; Surfactant; Polytetrafluoroethylene dispersion; Bar-coated electrode; Catalyst layer structure
Citation
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.45, no.57, pp.32825 - 32833
Indexed
SCIE
SCOPUS
Journal Title
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Volume
45
Number
57
Start Page
32825
End Page
32833
URI
https://scholar.korea.ac.kr/handle/2021.sw.korea/51474
DOI
10.1016/j.ijhydene.2020.03.095
ISSN
0360-3199
Abstract
In high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs), it is important that the structure of the electrode catalyst layer is formed uniformly. To achieve this, the binder must be well dispersed; however, polytetrafluoroethylene (PTFE), which is commonly employed in the preparation of HT-PEMFCs, is difficult to disperse during electrode manufacture due to its high hydrophobicity. In this study, we fabricate electrodes containing a surfactant to improve the dispersion of the PTFE binder and to enhance reproducibility during electrode manufacture. The electrodes are commonly prepared via a bar coating method, which is known to exhibit poor dispersion due to the small amounts of solvent employed compared to the spraying method. We then compare the properties of the obtained electrodes prepared in the presence and absence of the surfactant through physical and electrochemical characterization. It is found that the electrode containing the surfactant is structurally superior, and its single cell performance is significantly higher (i.e., 0.65 V at 0.2 Am cm(-2)). The single cells are suitable for operation at 150 degrees C using H-2/air at atmospheric pressure and a total platinum loading of 2.0 mg cm(-2). (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Engineering > Department of Chemical and Biological Engineering > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher SONG, Kwang Ho photo

SONG, Kwang Ho
공과대학 (화공생명공학과)
Read more

Altmetrics

Total Views & Downloads

BROWSE