Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yun, Sungho | - |
dc.contributor.author | Kwon, Junho | - |
dc.contributor.author | Cho, Wonhee | - |
dc.contributor.author | Lee, DongChan | - |
dc.contributor.author | Kim, Yongchan | - |
dc.date.accessioned | 2021-08-31T12:04:58Z | - |
dc.date.available | 2021-08-31T12:04:58Z | - |
dc.date.created | 2021-06-19 | - |
dc.date.issued | 2020-01-25 | - |
dc.identifier.issn | 1359-4311 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/57948 | - |
dc.description.abstract | Although the cooling channel is a crucial factor for improving the performance of a hot stamping die, only a limited number of studies have been conducted concerning its design technology for patchwork blanks. In this study, a mixed cooling channel (MCC) is proposed to improve the cooling performance of the hot stamping die for patchwork blanks. The MCC is a combination of the straight cooling channel (SCC) and conformal cooling channel (CCC). The cooling capacity, average temperature, standard deviation, and figure of merit (FOM) of the SCC, CCC, and MCC are estimated by conducting three-dimensional transient thereto-fluid simulations. The optimum mass flow ratio of the MCC is determined to be 10% considering the cooling capacity, average temperature, and standard deviation. The MCC exhibits superior cooling performance to the SCC and CCC for all performance indicators because it effectively cools both the heat accumulated patch and the wide blank. In addition, the daily production of the MCC is 7.6-9.0% greater than that of the SCC, and 5.8-6.8% greater than that of the CCC. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | - |
dc.subject | HEAT-TRANSFER COEFFICIENT | - |
dc.subject | BORON STEEL | - |
dc.subject | MICROSTRUCTURE | - |
dc.subject | FORMABILITY | - |
dc.subject | WATER | - |
dc.title | Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Yongchan | - |
dc.identifier.doi | 10.1016/j.applthermaleng.2019.114562 | - |
dc.identifier.scopusid | 2-s2.0-85074287444 | - |
dc.identifier.wosid | 000503314300032 | - |
dc.identifier.bibliographicCitation | APPLIED THERMAL ENGINEERING, v.165 | - |
dc.relation.isPartOf | APPLIED THERMAL ENGINEERING | - |
dc.citation.title | APPLIED THERMAL ENGINEERING | - |
dc.citation.volume | 165 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Thermodynamics | - |
dc.relation.journalResearchArea | Energy & Fuels | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Mechanics | - |
dc.relation.journalWebOfScienceCategory | Thermodynamics | - |
dc.relation.journalWebOfScienceCategory | Energy & Fuels | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.relation.journalWebOfScienceCategory | Mechanics | - |
dc.subject.keywordPlus | HEAT-TRANSFER COEFFICIENT | - |
dc.subject.keywordPlus | BORON STEEL | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | FORMABILITY | - |
dc.subject.keywordPlus | WATER | - |
dc.subject.keywordAuthor | Hot stamping | - |
dc.subject.keywordAuthor | Cooling channel design | - |
dc.subject.keywordAuthor | Patchwork blank | - |
dc.subject.keywordAuthor | Tailored blank | - |
dc.subject.keywordAuthor | Cooling performance | - |
dc.subject.keywordAuthor | CFD | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.