디지털 광 조명 방식으로 제작한 임시 크라운의 세척 시간에 따른3차원 적합도 평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이범일 | - |
dc.contributor.author | 유승규 | - |
dc.contributor.author | 유승민 | - |
dc.contributor.author | 김지환 | - |
dc.date.accessioned | 2021-08-31T17:04:11Z | - |
dc.date.available | 2021-08-31T17:04:11Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2020 | - |
dc.identifier.issn | 1229-3954 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/59505 | - |
dc.description.abstract | Purpose: This study aimed to compare three-dimensional adaptation with the rinsing time ofthe temporary crown produced using the digital light processing method. Methods: The maxillary right first molar abutment was scanned with a dental scanner. Atemporary crown was designed with the scanned abutment. The designed crown was madeof 10 temporary crowns using a digital light processing printer. The crowns were divided intothe 5-minute and 10-minute rinsing groups; 5 temporary crown washes were performed foreach group. In order to obtain the internal data, each group was scanned for a temporarycrown. The three-dimensional fit was measured by superimposing the scanned internal surfacedata and the abutment data. The average comparison of three-dimensional adaptationwas analyzed using the Mann–Whitney U test. Results: The 5-minute rinsing group showed a significantly higher adaptation of 71.42±3.08μm as compared to the 10-minute rinsing group (67.52±0.92 μm) (p<0.05). Conclusion: When making a temporary crown with a digital light processing method, a rinsingtime of 10 minutes is appropriate. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 대한치과기공학회 | - |
dc.title | 디지털 광 조명 방식으로 제작한 임시 크라운의 세척 시간에 따른3차원 적합도 평가 | - |
dc.title.alternative | Comparison of three-dimensional adaptation as per the rinsing time of temporary crown manufactured using a digital light processing printer | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김지환 | - |
dc.identifier.doi | 10.14347/jtd.2020.42.4.334 | - |
dc.identifier.bibliographicCitation | 대한치과기공학회지, v.42, no.4, pp.334 - 340 | - |
dc.relation.isPartOf | 대한치과기공학회지 | - |
dc.citation.title | 대한치과기공학회지 | - |
dc.citation.volume | 42 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 334 | - |
dc.citation.endPage | 340 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002671255 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Adaptation | - |
dc.subject.keywordAuthor | Additive manufacturing | - |
dc.subject.keywordAuthor | Digital light processing | - |
dc.subject.keywordAuthor | Provisional crown | - |
dc.subject.keywordAuthor | Vat photopolymerization | - |
dc.subject.keywordAuthor | . | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.