다양한 중합 방법으로 제작한 간접 수복물용 복합레진의 굴곡 강도
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김웅철 | - |
dc.contributor.author | 김동연 | - |
dc.contributor.author | 박진영 | - |
dc.contributor.author | 강후원 | - |
dc.contributor.author | 김지환 | - |
dc.date.accessioned | 2021-09-02T18:02:05Z | - |
dc.date.available | 2021-09-02T18:02:05Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 1229-3954 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/79035 | - |
dc.description.abstract | Purpose: The aim of this study is to evaluate composite resins of indirect restorations for testing of flexural strength according to various polymerization methods. Methods: Specimen was produced a total of 40 to 10 per each group with a length 25 mm, width 2 mm, thickness 2 mm using a Teflon zig. The polymerization groups were classified into four groups. The first group proceeded with light curing only(LC group). The second group proceeded with light and heat curing(LHC group). The third group proceeded with air press and light curing(ALC group). The fourth group proceeded with air press, light and heat curing(ALHC group). Each prepared group was evaluated by flexural strength test. Statistical analysis was performed by one-way ANOVA. Post-test was performed with Tukey test. Results: The lowest in the ALC group was 119.18 MPa and the highest in the ALHC group was 168.15 MPa. There were statistically significant differences. Conclusion : The composite resin of the indirect restoration is recommended to heat curing along with the air press. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 대한치과기공학회 | - |
dc.title | 다양한 중합 방법으로 제작한 간접 수복물용 복합레진의 굴곡 강도 | - |
dc.title.alternative | Flexural strength of composite resin fabricated by various polymerization method | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김웅철 | - |
dc.contributor.affiliatedAuthor | 김지환 | - |
dc.identifier.doi | 10.14347/kadt.2018.40.2.57 | - |
dc.identifier.bibliographicCitation | 대한치과기공학회지, v.40, no.2, pp.57 - 62 | - |
dc.relation.isPartOf | 대한치과기공학회지 | - |
dc.citation.title | 대한치과기공학회지 | - |
dc.citation.volume | 40 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 57 | - |
dc.citation.endPage | 62 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002357906 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Composite resin | - |
dc.subject.keywordAuthor | Light curing | - |
dc.subject.keywordAuthor | Heat curing | - |
dc.subject.keywordAuthor | Flexural strength | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.