마이크로웨이브 소결시간이 지르코니아 수복물의 3점 굴곡강도와 색조에 미치는 영향Influence of the microwave sintering period on the 3 point flexural strength and shade of zirconia restoration
- Other Titles
- Influence of the microwave sintering period on the 3 point flexural strength and shade of zirconia restoration
- Authors
- 강지혜; 유경민; 이지현; 송다연; 이정수; 김지환; 배은정
- Issue Date
- 2018
- Publisher
- 대한치과재료학회
- Keywords
- Zirconia; Microwave sintering time; 3 point flexural strength; Shade; 지르코니아; 마이크로웨이브 소결시간; 3점 굴곡강도; 색조
- Citation
- 대한치과재료학회지, v.45, no.3, pp.147 - 154
- Indexed
- KCI
- Journal Title
- 대한치과재료학회지
- Volume
- 45
- Number
- 3
- Start Page
- 147
- End Page
- 154
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/79278
- DOI
- 10.14815/kjdm.2018.45.3.147
- ISSN
- 2384-4434
- Abstract
- 본 연구는 치과용 CAD/CAM 지르코니아의 마이크로웨이브 소결시간에 따른 보철물의 3점 굴곡강도와 색조 차이를 비교하여 임상적 적용 가능성을 확인하고자 하였다. 3점 굴곡강도용 시편(n=30)과 색조측정용 시편 (n=28)을 제작하여 소결시간을 다르게 적용한 후 소결하였다. 3점 굴곡강도와 색조를 측정하고 독립표본 t-test로 분석하였다 (α=0.05). 3점 굴곡강도 측정 결과 단시간 소결 (short-term sintering, STS)의 평균은 245.47±29.89 MPa, 장시간 소결 (long-term sintering, LTS)의 평균은 284.27±31.56 MPa로 나타났으며, 통계적으로 유의한 차이가 있었다 (p<0.05). 색조 측정결과 ⊿E*ab에서 평균 STS가 1.51±0.48, LTS가 1.52±0.41로 나타났으나 통계적으로 유의한 차이는 없었다 (p>0.05). 위의 결과를 바탕으로 3점 굴곡강도에서 단시간 소결과 장시간 소결방법으로 제작된 지르코니아 수복물은 장시간 소결에서 강도가 높은 것으로 나타났으나 임상 적용을 위해서는 다른 조건의 실험이 필요할 것으로 사료된다. 색조에서는 소결시간에 따른 의미 있는 색조 차이를 보이지 않았고, 추후 스테인 등의 마무리 색조표현이 함께 적용된다면 임상적으로 적용하기에 충분하다고 판단된다.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Health Sciences > Division of Health Policy and Management > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.