Mechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yemam, Dinberu Molla | - |
dc.contributor.author | Kim, Baek-Joong | - |
dc.contributor.author | Moon, Ji-Yeon | - |
dc.contributor.author | Yi, Chongku | - |
dc.date.accessioned | 2021-09-03T08:57:53Z | - |
dc.date.available | 2021-09-03T08:57:53Z | - |
dc.date.created | 2021-06-16 | - |
dc.date.issued | 2017-03 | - |
dc.identifier.issn | 1996-1944 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/84277 | - |
dc.description.abstract | The objective of this study was to investigate the potential use of sand washing waste as filler for epoxy resin mortar. The mechanical properties of four series of mortars containing epoxy binder at 10, 15, 20, and 25 wt. % mixed with sand blended with sand washing waste filler in the range of 0-20 wt. % were examined. The compressive and flexural strength increased with the increase in epoxy and filler content; however, above epoxy 20 wt. %, slight change was seen in strength due to increase in epoxy and filler content. Modulus of elasticity also linearly increased with the increase in filler content, but the use of epoxy content beyond 20 wt. % decreased the modulus of elasticity of the mortar. For epoxy content at 10 wt. %, poor bond strength lower than 0.8 MPa was observed, and adding filler at 20 wt. % adversely affected the bond strength, in contrast to the mortars containing epoxy at 15, 20, 25 wt. %. The results indicate that the sand washing waste can be used as potential filler for epoxy resin mortar to obtain better mechanical properties by adding the optimum level of sand washing waste filler. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | MDPI AG | - |
dc.subject | POLYMER CONCRETE | - |
dc.subject | REPAIR | - |
dc.subject | COMPATIBILITY | - |
dc.subject | CRACKING | - |
dc.title | Mechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yi, Chongku | - |
dc.identifier.doi | 10.3390/ma10030246 | - |
dc.identifier.scopusid | 2-s2.0-85015007455 | - |
dc.identifier.wosid | 000400863500029 | - |
dc.identifier.bibliographicCitation | MATERIALS, v.10, no.3 | - |
dc.relation.isPartOf | MATERIALS | - |
dc.citation.title | MATERIALS | - |
dc.citation.volume | 10 | - |
dc.citation.number | 3 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalResearchArea | Physics | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Physical | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Physics, Applied | - |
dc.relation.journalWebOfScienceCategory | Physics, Condensed Matter | - |
dc.subject.keywordPlus | POLYMER CONCRETE | - |
dc.subject.keywordPlus | REPAIR | - |
dc.subject.keywordPlus | COMPATIBILITY | - |
dc.subject.keywordPlus | CRACKING | - |
dc.subject.keywordAuthor | epoxy resin mortar | - |
dc.subject.keywordAuthor | polymer binder | - |
dc.subject.keywordAuthor | filler | - |
dc.subject.keywordAuthor | mechanical properties | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.