적층가공방식을 이용한 열가압 세라믹 라미네이트 비니어의 적합도: 3차원 분석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 강신영 | - |
dc.contributor.author | 김웅철 | - |
dc.contributor.author | 이하나 | - |
dc.contributor.author | 김어빈 | - |
dc.contributor.author | 이경은 | - |
dc.contributor.author | 김지환 | - |
dc.date.accessioned | 2021-09-03T12:39:47Z | - |
dc.date.available | 2021-09-03T12:39:47Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2017 | - |
dc.identifier.issn | 1229-3954 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/85555 | - |
dc.description.abstract | Purpose: The purpose of this study is to analyze the fitness of heat - pressed ceramic laminate veneers fabricated using the additive manufacturing. Methods: Impression was replicated by using light body silicone and heavy body silicone on the custom tray, and it was fabricated using Type Ⅳ Stone. The test specimens were prepared by using a dental scanner, a laminating veneer using a dental design program, and a specimen with a 3D printer . The control specimens were prepared by the lost wax technique and heat - pressed to fabricate the specimens. The data of the specimens were measured by the RMS value of the internal fitness a using a 3-dimensional measurement program. Results: The Stereolithography laminate veneer group was measured at 78.10(4.09) μm and the LWV group was measured at 31.50(5.10) μm. There is a significant difference between the two groups (p<0.001) Conclusion : Evaluation of fitness laminate veneers was fabricated by additive manufacturing showed the difference statistically significantly and clinically acceptable result. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 대한치과기공학회 | - |
dc.title | 적층가공방식을 이용한 열가압 세라믹 라미네이트 비니어의 적합도: 3차원 분석 | - |
dc.title.alternative | Fitness of heat - pressed ceramic laminate veneer using additive manufacturing process: 3 Dimensional analysis | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김웅철 | - |
dc.identifier.doi | 10.14347/kadt.2017.39.3.137 | - |
dc.identifier.bibliographicCitation | 대한치과기공학회지, v.39, no.3, pp.137 - 143 | - |
dc.relation.isPartOf | 대한치과기공학회지 | - |
dc.citation.title | 대한치과기공학회지 | - |
dc.citation.volume | 39 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 137 | - |
dc.citation.endPage | 143 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002266835 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.description.journalRegisteredClass | other | - |
dc.subject.keywordAuthor | Stereolithography | - |
dc.subject.keywordAuthor | Additive manufacturing | - |
dc.subject.keywordAuthor | 3 dimensional evaluation | - |
dc.subject.keywordAuthor | Laminate veneer | - |
dc.subject.keywordAuthor | Lithium disilicate | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.