Mechanical behaviour of concrete with amorphous metallic and steel fibres
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Joo-Ha | - |
dc.contributor.author | Yoo, Doo-Yeol | - |
dc.contributor.author | Yoon, Young-Soo | - |
dc.date.accessioned | 2021-09-03T16:18:21Z | - |
dc.date.available | 2021-09-03T16:18:21Z | - |
dc.date.created | 2021-06-16 | - |
dc.date.issued | 2016-12 | - |
dc.identifier.issn | 0024-9831 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/86681 | - |
dc.description.abstract | In this study, a number of fibre-reinforced concrete (FRC) cylinders, beams and dog-bone-shaped specimens were fabricated and tested under static loading conditions. The primary variables of the investigation were the fibre type (amorphous metallic fibres and steel fibres), water/cement (w/c) ratio (0.6 and 0.45) and fibre volume content (0-0.75%). With a lower w/c ratio, the compressive strength, elastic modulus, flexural strength and tensile strength increased, whereas the fracture energy decreased regardless of the fibre type or content. Compared with FRC with amorphous metallic fibres, FRC with hooked-end steel fibres exhibited much higher flexural toughness, residual strength and fracture energy, but showed lower compressive toughness and strain capacity. The volume content of amorphous metallic fibres had a pronounced effect on the flexural and tensile behaviours - higher fibre contents led to higher strength, deflection capacity, toughness and fracture energy because of the improvement of the fibre bridging capacity - whereas it had an insignificant influence on compressive strength and elastic modulus. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ICE PUBLISHING | - |
dc.subject | REINFORCED CEMENTITIOUS COMPOSITES | - |
dc.subject | TENSILE CHARACTERISTICS | - |
dc.subject | PERFORMANCE | - |
dc.subject | STRENGTH | - |
dc.subject | COMPRESSION | - |
dc.subject | SHRINKAGE | - |
dc.subject | BEAMS | - |
dc.title | Mechanical behaviour of concrete with amorphous metallic and steel fibres | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yoon, Young-Soo | - |
dc.identifier.doi | 10.1680/jmacr.15.00493 | - |
dc.identifier.wosid | 000387908300002 | - |
dc.identifier.bibliographicCitation | MAGAZINE OF CONCRETE RESEARCH, v.68, no.24, pp.1253 - 1264 | - |
dc.relation.isPartOf | MAGAZINE OF CONCRETE RESEARCH | - |
dc.citation.title | MAGAZINE OF CONCRETE RESEARCH | - |
dc.citation.volume | 68 | - |
dc.citation.number | 24 | - |
dc.citation.startPage | 1253 | - |
dc.citation.endPage | 1264 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Construction & Building Technology | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Construction & Building Technology | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | REINFORCED CEMENTITIOUS COMPOSITES | - |
dc.subject.keywordPlus | TENSILE CHARACTERISTICS | - |
dc.subject.keywordPlus | PERFORMANCE | - |
dc.subject.keywordPlus | STRENGTH | - |
dc.subject.keywordPlus | COMPRESSION | - |
dc.subject.keywordPlus | SHRINKAGE | - |
dc.subject.keywordPlus | BEAMS | - |
dc.subject.keywordAuthor | fibre-reinforced concrete | - |
dc.subject.keywordAuthor | tensile properties | - |
dc.subject.keywordAuthor | toughness | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.