Physical Analysis of Rotor-to-Stator Rub in a Large-Capacity Low-Pressure Steam Turbogenerator
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Cha, Seogju | - |
dc.contributor.author | Na, Sungsoo | - |
dc.date.accessioned | 2021-09-03T22:19:15Z | - |
dc.date.available | 2021-09-03T22:19:15Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2016-07 | - |
dc.identifier.issn | 0742-4795 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/88163 | - |
dc.description.abstract | Excessive vibration in large-capacity turbine generators can lead to expensive repairs and downtime with associated loss of operational income. Therefore, it is vital to detect the rubbing location in the rotor system at an early stage. The challenge is in achieving this without the expense and labor of complete disassembly. In this study, we present a practical tool for estimating the rubbing locations in a large-capacity rotor system from the shaft vibration patterns at each bearing. The measurement and analysis were performed on the rotor system of an 800-MW class large-capacity turbine generator. Three vibration patterns were observed in the machine operating on-site and were explained in terms of vibration modal analysis and the unbalance response characteristics to identify the rubbing locations. These results will be of interest to industrial engineers and have the potential to increase savings in operation costs. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ASME | - |
dc.subject | RESPONSES | - |
dc.title | Physical Analysis of Rotor-to-Stator Rub in a Large-Capacity Low-Pressure Steam Turbogenerator | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Na, Sungsoo | - |
dc.identifier.doi | 10.1115/1.4032415 | - |
dc.identifier.scopusid | 2-s2.0-84958793686 | - |
dc.identifier.wosid | 000377539700017 | - |
dc.identifier.bibliographicCitation | JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, v.138, no.7 | - |
dc.relation.isPartOf | JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME | - |
dc.citation.title | JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME | - |
dc.citation.volume | 138 | - |
dc.citation.number | 7 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordPlus | RESPONSES | - |
dc.subject.keywordAuthor | rubbing vibration | - |
dc.subject.keywordAuthor | rubbing vibration pattern | - |
dc.subject.keywordAuthor | turbine rotor system | - |
dc.subject.keywordAuthor | low-pressure turbine | - |
dc.subject.keywordAuthor | vibration mode | - |
dc.subject.keywordAuthor | vibration response | - |
dc.subject.keywordAuthor | shaft unbalance | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.