Practical Determination of Friction Coefficient of Al 3003 for Forming of Backward Extruded Part Using Simple Tip Test and Inverse Finite Element Analysis
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Bong, H. J. | - |
dc.contributor.author | Leem, D. | - |
dc.contributor.author | Kim, J. H. | - |
dc.contributor.author | Im, Y. T. | - |
dc.contributor.author | Lee, M. G. | - |
dc.date.accessioned | 2021-09-04T00:15:30Z | - |
dc.date.available | 2021-09-04T00:15:30Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2016-05 | - |
dc.identifier.issn | 1598-9623 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/88820 | - |
dc.description.abstract | The friction coefficient for aluminum alloy 3003 was determined from a specially designed tip test and finite element (FE) simulations. Measured radial tip distance after the tip test was compared to the FE simulations by iteratively changing friction coefficient and the best fitting friction coefficient was determined. To consider strain rate effect on flow stress response during large plastic deformation, a new combined Hollomon-Voce hardening law was proposed. The friction under three different surface conditions was considered by the proposed inverse FE analysis. The results showed that there was obvious strain rate effect on the predicted punch load in the tip test. Moreover, the different friction coefficients were numerically determined for punch/workpiece and die/workpiece interfaces. Two possible causes of this difference were discussed by the analysis on contact normal pressure and slip velocity distributions of the two interfaces. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | KOREAN INST METALS MATERIALS | - |
dc.subject | RING COMPRESSION TEST | - |
dc.subject | ALUMINUM-ALLOY | - |
dc.subject | SIMULATION | - |
dc.subject | EXTRUSION | - |
dc.subject | BEHAVIOR | - |
dc.subject | DESIGN | - |
dc.subject | STEEL | - |
dc.title | Practical Determination of Friction Coefficient of Al 3003 for Forming of Backward Extruded Part Using Simple Tip Test and Inverse Finite Element Analysis | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, M. G. | - |
dc.identifier.doi | 10.1007/s12540-015-5158-3 | - |
dc.identifier.scopusid | 2-s2.0-84964010229 | - |
dc.identifier.wosid | 000375492300002 | - |
dc.identifier.bibliographicCitation | METALS AND MATERIALS INTERNATIONAL, v.22, no.3, pp.356 - 363 | - |
dc.relation.isPartOf | METALS AND MATERIALS INTERNATIONAL | - |
dc.citation.title | METALS AND MATERIALS INTERNATIONAL | - |
dc.citation.volume | 22 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 356 | - |
dc.citation.endPage | 363 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART002106628 | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | RING COMPRESSION TEST | - |
dc.subject.keywordPlus | ALUMINUM-ALLOY | - |
dc.subject.keywordPlus | SIMULATION | - |
dc.subject.keywordPlus | EXTRUSION | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | DESIGN | - |
dc.subject.keywordPlus | STEEL | - |
dc.subject.keywordAuthor | tip test | - |
dc.subject.keywordAuthor | computer simulation | - |
dc.subject.keywordAuthor | metals | - |
dc.subject.keywordAuthor | strain rate | - |
dc.subject.keywordAuthor | friction coefficient | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.