Observation and understanding of scratch behaviors of glass fiber reinforced polycarbonate plates with various packing pressures during the injection molding process
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Wee, Jung-Wook | - |
dc.contributor.author | Park, Sang-Yoon | - |
dc.contributor.author | Choi, Byoung-Ho | - |
dc.date.accessioned | 2021-09-04T12:04:09Z | - |
dc.date.available | 2021-09-04T12:04:09Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2015-10 | - |
dc.identifier.issn | 0301-679X | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/92352 | - |
dc.description.abstract | In this paper, the scratch resistance of injection molded, glass fiber reinforced polycarbonate (PC), constructed with different packing pressures and fiber compositions, was evaluated using the progressive normal load scratch test. The quantitative evaluation of scratch resistance of the samples was based on the onset of visibility and morphological transition points of the scratch for two fiber orientations and various scratch speeds. This study reveals that glass fiber reinforcement exerts a beneficial influence on scratch visibility; however, it has an adverse effect on morphological damage. Anisotropy and heterogeneity of glass fiber reinforced PC also plays a role in scratch resistance. The relationship between the onset of scratch visibility and damage transition points is also discussed. (C) 2015 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | FILLED POLYPROPYLENE MATERIALS | - |
dc.subject | STRAIN-RATE | - |
dc.subject | THERMOPLASTIC OLEFINS | - |
dc.subject | QUANTITATIVE-EVALUATION | - |
dc.subject | MAR RESISTANCE | - |
dc.subject | POLYMERS | - |
dc.subject | COMPOSITES | - |
dc.subject | TEMPERATURE | - |
dc.subject | ORIENTATION | - |
dc.subject | FRICTION | - |
dc.title | Observation and understanding of scratch behaviors of glass fiber reinforced polycarbonate plates with various packing pressures during the injection molding process | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Choi, Byoung-Ho | - |
dc.identifier.doi | 10.1016/j.triboint.2015.05.009 | - |
dc.identifier.scopusid | 2-s2.0-84930640737 | - |
dc.identifier.wosid | 000359166200053 | - |
dc.identifier.bibliographicCitation | TRIBOLOGY INTERNATIONAL, v.90, pp.491 - 501 | - |
dc.relation.isPartOf | TRIBOLOGY INTERNATIONAL | - |
dc.citation.title | TRIBOLOGY INTERNATIONAL | - |
dc.citation.volume | 90 | - |
dc.citation.startPage | 491 | - |
dc.citation.endPage | 501 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordPlus | FILLED POLYPROPYLENE MATERIALS | - |
dc.subject.keywordPlus | STRAIN-RATE | - |
dc.subject.keywordPlus | THERMOPLASTIC OLEFINS | - |
dc.subject.keywordPlus | QUANTITATIVE-EVALUATION | - |
dc.subject.keywordPlus | MAR RESISTANCE | - |
dc.subject.keywordPlus | POLYMERS | - |
dc.subject.keywordPlus | COMPOSITES | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | ORIENTATION | - |
dc.subject.keywordPlus | FRICTION | - |
dc.subject.keywordAuthor | Scratch | - |
dc.subject.keywordAuthor | Polycarbonate | - |
dc.subject.keywordAuthor | Glass fibers | - |
dc.subject.keywordAuthor | Injection molding | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.