Flexural capacity of plate girders with very slender corrugated webs
- Authors
- Lho, Seung-Hee; Lee, Chang-Hwan; Oh, Jin-Tak; Ju, Young K.; Kim, Sang-Dae
- Issue Date
- 12월-2014
- Publisher
- KOREAN SOC STEEL CONSTRUCTION-KSSC
- Keywords
- corrugated webs; plate girders; flexural capacity; steel beams; buckling; slender webs
- Citation
- INTERNATIONAL JOURNAL OF STEEL STRUCTURES, v.14, no.4, pp.731 - 744
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- INTERNATIONAL JOURNAL OF STEEL STRUCTURES
- Volume
- 14
- Number
- 4
- Start Page
- 731
- End Page
- 744
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/96716
- DOI
- 10.1007/s13296-014-1205-z
- ISSN
- 1598-2351
- Abstract
- Corrugated web beams in industrial buildings commonly have a very slender web, which can induce a brittle vertical flange buckling. Full-scale corrugated web beams were tested, in order to verify the flexural capacity and the limit state of the vertical flange buckling of corrugated web beams with very slender webs. Flexural behavior and the effect of the residual stress were explored. All specimens failed due to vertical flange buckling after flange yielding at the mid-span of specimens. Corrugated web beams in the test had the flexural strength 6 similar to 17% larger than the flexural capacities from DASt-Ri 015. Based on the test results, a modified slenderness ratio limit, modified to 1.5 times that of the conventional value, was suggested. Numerical analysis with various parameters was performed to verify the accuracy of the modified slenderness ratio limit.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Civil, Environmental and Architectural Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.