Wind-induced responses of super-tall buildings with various atypical building shapes
- Authors
- Kim, Y. C.; Tamura, Y.; Tanaka, H.; Ohtake, K.; Bandi, E. K.; Yoshida, A.
- Issue Date
- 10월-2014
- Publisher
- ELSEVIER SCIENCE BV
- Keywords
- Time history analysis; Peak normal stress; Damping ratio; Loading condition
- Citation
- JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, v.133, pp.191 - 199
- Indexed
- SCIE
SCOPUS
- Journal Title
- JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS
- Volume
- 133
- Start Page
- 191
- End Page
- 199
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/97157
- DOI
- 10.1016/j.jweia.2014.06.004
- ISSN
- 0167-6105
- Abstract
- A wind tunnel tests were conducted on 13 super-tall building models with atypical building shapes under an urban area flow. The primary purpose of the present study was to directly compare the wind load effects on atypical super-tall buildings. Time history analyses were conducted using a frame model by inputting local wind forces at the center of each floor. The results show that the peak normal stresses on a square model are the largest among all the models tested, the setback model shows the smallest peak normal stresses of the single modification models tested, and CC+TP+360Hel shows the smallest peak normal stresses of the multiple modification models tested. The contributions of bending moments are about 20% of the total, and most of the peak normal stresses resulted from axial force. The increase in bending moment in the across-wind direction becomes significant as the damping ratio decreases, and the sensitivity of the peak normal stresses for the helical and multiple modification models to damping ratio is smaller than those of the other models. From the analyses for the various loading conditions, it was found that the contribution of bending moment in the along-wind direction is the largest and that of torsional moment is almost negligible. (C) 2014 Elsevier Ltd. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - ETC > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.