Highly reliable Ti-based ohmic contact to N-polar n-type GaN for vertical-geometry light-emitting diodes by using a Ta barrier layer
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, Jae-Seong | - |
dc.contributor.author | Han, Jaecheon | - |
dc.contributor.author | Seong, Tae-Yeon | - |
dc.date.accessioned | 2021-09-05T08:55:47Z | - |
dc.date.available | 2021-09-05T08:55:47Z | - |
dc.date.created | 2021-06-15 | - |
dc.date.issued | 2014-05-05 | - |
dc.identifier.issn | 1094-4087 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/98537 | - |
dc.description.abstract | The formation of thermally stable and low resistance Ti/Al-based ohmic contacts to N-polar n-GaN for high-power vertical light-emitting diodes (VLEDs) using a Ta diffusion barrier is presented. Before annealing, both Ti/Al/Au and Ti/Ta/Al/Au contacts reveal ohmic behavior with specific contact resistances of 2.4 x 10(-4) and 1.2 x 10(-4) Omega cm(2), respectively. However, unlike the Ti/Al/Au samples that are electrically degraded with increasing annealing time at 250 degrees C, the Ti/Ta/Al/Au samples remain thermally stable even after annealing for 600 min. LEDs fabricated with the Ti/Ta/Al/Au contacts yield 8.3% higher output power (at 300 mA) than LEDs with the Ti/Al/Au contact. X-ray photoemission spectroscopy results show that the Ta layer serves as an efficient barrier to the indiffusion of oxygen toward the GaN. On the basis of the XPS and electrical results, the annealing dependence of the electrical characteristics of Ti/Al-based contacts are described and discussed. (C) 2014 Optical Society of America | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | OPTICAL SOC AMER | - |
dc.subject | P-TYPE GAN | - |
dc.subject | CHEMICAL-VAPOR-DEPOSITION | - |
dc.subject | LASER LIFT-OFF | - |
dc.subject | LOW-RESISTANCE | - |
dc.subject | CRYSTAL-POLARITY | - |
dc.subject | TI/AL CONTACTS | - |
dc.subject | SUBSTRATE | - |
dc.subject | MECHANISM | - |
dc.subject | FACE | - |
dc.title | Highly reliable Ti-based ohmic contact to N-polar n-type GaN for vertical-geometry light-emitting diodes by using a Ta barrier layer | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Seong, Tae-Yeon | - |
dc.identifier.doi | 10.1364/OE.22.00A759 | - |
dc.identifier.scopusid | 2-s2.0-84899854993 | - |
dc.identifier.wosid | 000335905300018 | - |
dc.identifier.bibliographicCitation | OPTICS EXPRESS, v.22, no.9, pp.A759 - A764 | - |
dc.relation.isPartOf | OPTICS EXPRESS | - |
dc.citation.title | OPTICS EXPRESS | - |
dc.citation.volume | 22 | - |
dc.citation.number | 9 | - |
dc.citation.startPage | A759 | - |
dc.citation.endPage | A764 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Optics | - |
dc.relation.journalWebOfScienceCategory | Optics | - |
dc.subject.keywordPlus | P-TYPE GAN | - |
dc.subject.keywordPlus | CHEMICAL-VAPOR-DEPOSITION | - |
dc.subject.keywordPlus | LASER LIFT-OFF | - |
dc.subject.keywordPlus | LOW-RESISTANCE | - |
dc.subject.keywordPlus | CRYSTAL-POLARITY | - |
dc.subject.keywordPlus | TI/AL CONTACTS | - |
dc.subject.keywordPlus | SUBSTRATE | - |
dc.subject.keywordPlus | MECHANISM | - |
dc.subject.keywordPlus | FACE | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.