Effects of Sc and Be Microalloying Elements on Mechanical Properties of Al-Zn-Mg-Cu (Al7xxx) Alloy

초록

We demonstrate via comprehensive microstructural investigation the effects of Sc and Be microalloying on the mechanical properties of Al-Zn-Mg-Cu-based alloys, where Sc microalloying enhances the tensile properties of an Al-9.0Zn-3.0Mg-3.0Cu alloy from 645 MPa (epsilon(f) = similar to 6%) to 672 MPa (epsilon(f) = similar to 8%). In contrast, simultaneous microalloying with Sc and Be reduces the mechanical strength of a synthesized Al alloy to 654 MPa (epsilon(f) = similar to 8%). Comprehensive microstructural investigation revealed that Sc microalloying leads to Al grain refinement, the formation of hardening (MgZn2, Al3M) phases, and an increase in the solid solution of Al. Additional Be microalloying also enhances the formation of MgZn2 phase, while Al3M (M: Zr, Sc) type phases are restrained from forming in Al grains. Furthermore, solid solution in Al grains is reduced by the trace addition of Be microalloying, resulting in an increase in large intermetallic compounds at Al grain boundaries.

키워드