In-situ study of σ phase evolution in 25Cr-7Ni duplex stainless steel (DSS): Unrevealing critical insight

  • Hajra, Raj Narayan; 
  • Jun Han, Byoung; 
  • Park, Jin Woong; 
  • Hyeok Kim, Woo; 
  • Lee, Joonho; 
  • 외 2명
Citations

WEB OF SCIENCE

11
Citations

SCOPUS

13

초록

The current understanding of the formation mechanism and kinetics of the σ phase in DSS remains ambiguous. This study investigates the in-situ evolution of the σ phase in DSS through a multi-faceted approach. Distinct σ phase formation mechanisms were identified at 850 °C and 950 °C, with short-range diffusion of eutectoid decomposition at 850 °C and long-range diffusion of nucleation and growth at 950 °C. In-situ X-ray diffraction (XRD) revealed that the lattice parameter of the γ phase peaks at ∼ 600 °C. The thermal expansion coefficient (CTE) of the γ phase is 1.8 times higher than that of the α phase at low temperatures. Interestingly, the convergence of the CTEs of the α and γ phases above 600 °C triggers σ nucleation. The strain field diagram shows maximum impinging strain at the lattice parameter maxima just before the σ formation range. The adverse effects of the σ phase on DSS heat transport properties were also explored, showing an initial increase in thermal conductivity with an increasing γ volume fraction, followed by an 18 % decrease upon σ evolution. First-principle calculations highlight the correlation between Ni enrichment and lattice parameter maxima, supporting these findings. © 2024 The Authors

키워드

Confocal Scanning Laser Microscopy (CSLM); Duplex Stainless Steel; High-temperature X-ray Diffraction; Thermal Conductivity, First-principles Calculation; Thermal Diffusivity; PITTING CORROSION; SIGMA; PRECIPITATION; STABILITY; KINETICS; TUNGSTEN; CD3MN; ZONE
제목
In-situ study of σ phase evolution in 25Cr-7Ni duplex stainless steel (DSS): Unrevealing critical insight
저자
Hajra, Raj Narayan; Jun Han, Byoung; Park, Jin Woong; Hyeok Kim, Woo; Lee, Joonho; Ko, Won-Seok; Han Kim, Jeoung
DOI
10.1016/j.matdes.2024.113141
발행일
2024-08
유형
Article
저널명
Materials & Design
권
244