Numerical study of the effects of injection-port design on the heating performance of an R134a heat pump with vapor injection used in electric vehicles

초록

Heat pumps, which enable the cooling and heating of vehicular cabins, consume a significant portiori of the total energy consumption in electric vehicles (EVs). The efficiency of the heat pump is typically degraded owing to cold-weather conditions, so the refrigerant-injection technique has been proposed for improving the system performance and compressor reliability. In this study, a simulation model for an R134a heat pump with vapor injection is developed and validated by performing thermodynamic analyses with geometrical information. The effects of the injection-port design are investigated using the developed numerical model. Single-injection and dual-injection ports are considered to optimize the coefficient of performance (COP) and isentropic efficiency by controlling the injection mass flow rate. The optimal angles of the single- and dual-injection ports are determined to be 440 and 535 /355 (for pocket AFB), respectively, while the corresponding COPs are improved by 7.5% and 9.8%, respectively, compared to the non-injection heat pump at an outdoor temperature of 10 degrees C. (C) 2017 Elsevier Ltd. All rights reserved.

키워드