In situ immuno-magnetic concentration-based biosensor systems for the rapid detection of Listeria monocytogenes

  • Kim, Hee-Soo
  • Cho, Il-Hoon
  • Seo, Sung-Min
  • Jeon, Jin-Woo
  • Paek, Se-Hwan
Citations

WEB OF SCIENCE

14
Citations

SCOPUS

16

초록

A plastic module for in situ immuno-magnetic concentration (IMC) was devised by engraving acrylics and physically combining the system with a rapid test device to detect foodborne pathogen. The IMC moduleinstalled analytical system consisted of three compartments for magnetic separation, sample medium absorption, and analysis of the target microorganism. To experimentally simulate a practical situation, immuno-magnetic beads were prepared by coupling monoclonal antibodies specific to Listeria monocytogenes, which was used as a model analyte, to chemically functionalized beads. Under the optimal conditions, the IMC module condensed the medium by a factor of 100 (e.g., from 10 mL to 100 pL) within 5 min and enriched the microorganism by about 60-fold. This concentrated sample was then analyzed using two different analytical systems based on lateral flow, i.e., ELISA-on-a-chip and immuno-chromatographic assay, which had high detection capabilities, 3.6 x 10(2) and 6.6x 10(3) cells mL(-1), respectively. Thus, the IMC moduleinstalled biosensor system was able to sequentially condense a large sample volume and detect the presence of contaminants within, for example, 30 min. Therefore, this approach could be suitable for early screening of food products that may be contaminated with microorganisms. (C) 2011 Elsevier B.V. All rights reserved.

키워드

Immuno-magnetic concentrationRapid detectionHigh sensitivityEarly detection of contaminated foodsFood-borne microorganismCROSS-FLOW CHROMATOGRAPHYIMMUNOMAGNETIC SEPARATIONMONOCLONAL-ANTIBODYUNITED-STATESSTRIP TESTPCRIMMUNOCHROMATOGRAPHYSINGLEFOODSSURVEILLANCE
제목
In situ immuno-magnetic concentration-based biosensor systems for the rapid detection of Listeria monocytogenes
저자
Kim, Hee-SooCho, Il-HoonSeo, Sung-MinJeon, Jin-WooPaek, Se-Hwan
DOI
10.1016/j.msec.2011.10.012
발행일
2012-03-01
유형
Article
저널명
Materials Science and Engineering: C
32
2
페이지
160 ~ 166