Surface Tension Measurements of 430 Stainless Steel

초록

The surface tension of 430 stainless steel was measured using an electromagnetic levitation (EML) method at temperatures of 1 707-2 000 K, under a 5 vol% H-2-He atmosphere. For comparison, the surface tension was also measured using a constrained drop method; specifically the advanced sessile drop method. At 1 823 K, the surface tension of the 430 stainless steel was estimated from the electromagnetic levitation and the constrained drop methods to be 1.802 and 1.614 N/m, respectively. A subsequent analysis of oxygen content showed that the former contained similar to 7 ppm oxygen, whereas the latter had 60 ppm. It was therefore considered that the observed difference in measurements was the result of a contamination by oxygen. Furthermore, the EML experimental results were found to be close to the theoretically calculated values for the Fe-Cr-Si system. Consequently, for complex multi-component commercial steels such as the 430 stainless steel, the levitation method is recommended for the measurement of surface tension.

키워드