On the synthesis of a hierarchically-structured ZSM-5 zeolite and the effect of its physicochemical properties with Cu impregnation on cold-start hydrocarbon trap performance

초록

A hierarchically structured zeolite (self-pillared pentasil; SPP) comprised of MFI nanosheets or lamellae has been synthesized in various Si/Al ratios and mesoporosities. It turns out that a simple removal of ethanol in a synthesis sol resulted in increased mesoporosity, while the additional reduction of water further increased mesoporosity. In addition, we could synthesize the SPP particle with the actual Si/Al ratio as low as similar to 23 with a modest mesoporosity. With these hierarchically structured SPP particles, we further conducted copper impregnation on them in order to use as a hydrocarbon (HC) trap. The resulting Cu-impregnated SPPs could not only adsorb HCs in the exit gas stream including water vapor, but also serve as an active oxidizer of HCs. Specifically, Cuimpregnated SPP with an actual Si/Al ratio of similar to 22 and medium mesoporosity exhibited very high performance in cold-start trap tests; desirably adsorbing propene and toluene even in the presence of 10 vol% steam, holding them up to higher temperatures (90 degrees C for propene and 190 degrees C for toluene), and furthermore, oxidizing the hydrocarbons. The preferred adsorption can be attributed to the larger amount of exchanged Cu2+ ions in SPP particles with a lower Si/Al ratio, while the additional oxidation was due to the CuO particles dispersed on the SPP surface. However, the hydrothermal stability test revealed that the zeolite structure in the Cu-impregnated SPPs was collapsed and transformed into another undesired phase, thus losing the above-mentioned adsorption ability. Nevertheless, the corresponding oxidation performance was well maintained, indicating the robust, active role of the CuO particles.

키워드