InGaN/AlGaInN-based ultraviolet light-emitting diodes with indium gallium tin oxide electrodes

Citations

WEB OF SCIENCE

4
Citations

SCOPUS

5

초록

In this study, In-and Sn-doped GaO (IGTO) is proposed as an alternative transparent conductive electrode for indiwum tin oxide (ITO) to improve the performance of InGaN/AlGaInN-based near ultraviolet light-emitting diodes (NUV LEDs). IGTO films were prepared by co-sputtering the ITO and Ga2O3 targets under various target power ratios. Among those, IGTO films post-annealed at 700 degrees C under a hydrogen environment gave rise to a transmittance of 94% at 385 nm and a contact resistance of 9.4 x 10-3 Omega-cm2 with a sheet resistance of 124 Omega/Upsilon. Compared to ITO-based NUV LEDs, the IGTO-based NUV LED showed a 9% improvement in the light output power, probably due to IGTO's higher transmittance, although the forward voltage was still higher by 0.23 V. (C) 2015 Elsevier B.V. All rights reserved.

키워드

Hydrogen annealing; Indium gallium tin oxide; Transparent conductive electrode; Ultraviolet light-emitting diode; OHMIC CONTACTS; GAN; PERFORMANCE
제목
InGaN/AlGaInN-based ultraviolet light-emitting diodes with indium gallium tin oxide electrodes
저자
Kim, Sukwon; Kim, Tae Geun
DOI
10.1016/j.tsf.2015.08.023
발행일
2015-09-30
유형
Article
저널명
Thin Solid Films
권
591
페이지
39 ~ 42