Friction between a new low-steel composite material and milled steel for SAFE Dampers

초록

This paper describes the development process of a new low-steel composite friction material and the experiments to investigate its frictional behavior. Automotive braking technology was adapted to derive an optimal friction damper for buildings, and a high friction coefficient and stable behavior were set as the primary targets for performance. To improve performance, clamping details which incorporated load washers were also proposed. In order to evaluate the performance of the friction system, pseudo-dynamic tests were conducted. In the experiments, the proposed friction dampers showed repeatable, predictable, and very stable behavior without significant fading of frictional resistance, even under hundreds of repetitive sliding excursions. The friction load tended to be proportional to the initial clamping force regardless of the real-time clamping force, thus confirming that the behavior of the proposed dampers could be predicted using the idealized Coulomb friction model. It was also verified that frictional performance could be remarkably increased through the use of conical shaped load washers, when applied correctly. Furthermore, nonlinear time history analysis was performed on a five-story example building with and without friction dampers. Based on the results, the friction damped system demonstrated effectiveness in reducing structural responses such as roof displacement, base shear force, and story drift ratio compared to the original undamped frame system. (C) 2016 Elsevier Ltd. All rights reserved.

키워드