Effect of surface contact conditions on the stick-slip behavior of brake friction material
- Authors
- Yoon, S. W.; Shin, M. W.; Lee, W. G.; Jang, H.
- Issue Date
- 30-7월-2012
- Publisher
- ELSEVIER SCIENCE SA
- Keywords
- Brake material; Stick-slip; Surface topography; Brakes; Sliding wear
- Citation
- WEAR, v.294, pp.305 - 312
- Indexed
- SCIE
SCOPUS
- Journal Title
- WEAR
- Volume
- 294
- Start Page
- 305
- End Page
- 312
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/107911
- DOI
- 10.1016/j.wear.2012.07.011
- ISSN
- 0043-1648
- Abstract
- Brake-induced stick-slip, which determines the propensity of a brake system to generate noise, was investigated by analyzing the friction oscillation at different loads, speeds, and surface topographies. The friction characteristics at the sliding interface were obtained using a pad-on-disk type tribometer and a 1/5-scale brake dynamometer. Results showed that the size and stiffness of the surface contact plateaus significantly affect the propensity of stick-slip and wear. The stick-slip amplitude increased with normal load and decreased with sliding speed. Contact stiffness of the friction material, which was modified by producing shallow slots on the rubbing surface, also strongly affected the stick-slip propensity, whereas Delta mu(= mu(s) - mu(k)) was not changed by the surface modification. The strong effects from the contact stiffness suggest that the height distribution of the surface plateaus can change the stick-slip propensity of a brake friction material. (C) 2012 Elsevier B.V. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.