Plastic limit loads for cracked large bore branch junction
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Myeong, Man-Sik | - |
dc.contributor.author | Kim, Yun-Jae | - |
dc.contributor.author | Budden, P. J. | - |
dc.date.accessioned | 2021-09-07T11:11:58Z | - |
dc.date.available | 2021-09-07T11:11:58Z | - |
dc.date.created | 2021-06-14 | - |
dc.date.issued | 2011-07 | - |
dc.identifier.issn | 0013-7944 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/112147 | - |
dc.description.abstract | This paper reports plastic limit loads for a cracked large bore branch junction, based on three-dimensional finite element limit analyses using elastic-perfectly plastic materials. Part-through surface and through-wall cracks are postulated in the intersection. For loading conditions, internal pressure and (in-plane and out-of-plane) bending to the branch pipe and to the run pipe are considered. The effect of the crack on limit loads is found to be significant for internal pressure and bending to the branch pipe, but not for bending to the run pipe. The large geometry change effect for bending to the branch pipe is briefly discussed. (C) 2011 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | - |
dc.subject | INTERNAL-PRESSURE | - |
dc.subject | PIPE BENDS | - |
dc.title | Plastic limit loads for cracked large bore branch junction | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Yun-Jae | - |
dc.identifier.doi | 10.1016/j.engfracmech.2011.05.003 | - |
dc.identifier.scopusid | 2-s2.0-79959492922 | - |
dc.identifier.wosid | 000292943800003 | - |
dc.identifier.bibliographicCitation | ENGINEERING FRACTURE MECHANICS, v.78, no.11, pp.2298 - 2309 | - |
dc.relation.isPartOf | ENGINEERING FRACTURE MECHANICS | - |
dc.citation.title | ENGINEERING FRACTURE MECHANICS | - |
dc.citation.volume | 78 | - |
dc.citation.number | 11 | - |
dc.citation.startPage | 2298 | - |
dc.citation.endPage | 2309 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Mechanics | - |
dc.relation.journalWebOfScienceCategory | Mechanics | - |
dc.subject.keywordPlus | INTERNAL-PRESSURE | - |
dc.subject.keywordPlus | PIPE BENDS | - |
dc.subject.keywordAuthor | Finite element limit analysis | - |
dc.subject.keywordAuthor | Large bore branch | - |
dc.subject.keywordAuthor | Limit load | - |
dc.subject.keywordAuthor | Part-through crack | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.