Electrical characteristics of In/ITO p-type ohmic contacts for high-performance GaN-based light-emitting diodes

Abstract

We have investigated the annealing-induced improved electrical properties of In(10 nm)/ITO(200 nm) contacts with p-type GaN. The contacts become ohmic with a specific contact resistance of 2.75 x 10(-3) Omega cm(2) upon annealing at 650 degrees C in air. X-ray photoemission spectroscopy (XPS) Ga 2p core levels obtained from the interface regions before and after annealing indicate a large band-bending of p-GaN, resulting in an increase in the Schottky barrier height. STEM/energy dispersive X-ray (EDX) profiling results exhibit the formation of interfacial In-Ga-Sn-oxide. Based on the STEM and XPS results, the ohmic formation mechanisms are described and discussed. It is also shown that patterning by nano-imprint lithography improves the light output power of blue LEDs by 18-28% as compared to that of LEDs fabricated with unpatterned In/ITO contacts. (C) 2010 Elsevier Ltd. All rights reserved.