Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Operation characteristics of portable direct methanol fuel cell stack at sub-zero temperatures using hydrocarbon membrane and high concentration methanol

Authors
Park, Young-ChulPeck, Dong-HyunKim, Sang-KyungLim, SeongyopLee, Dok-YolJi, HyunjinJung, Doo-Hwan
Issue Date
1-Jun-2010
Publisher
PERGAMON-ELSEVIER SCIENCE LTD
Keywords
Direct methanol fuel cell (DMFC); Stack; Cold start; Operation mode; Self-heating
Citation
ELECTROCHIMICA ACTA, v.55, no.15, pp.4512 - 4518
Indexed
SCIE
SCOPUS
Journal Title
ELECTROCHIMICA ACTA
Volume
55
Number
15
Start Page
4512
End Page
4518
URI
https://scholar.korea.ac.kr/handle/2021.sw.korea/116264
DOI
10.1016/j.electacta.2010.02.096
ISSN
0013-4686
Abstract
Cold start and operation of a direct methanol fuel cell (DMFC) are investigated at sub-zero temperatures by using a 10-cell stack. The stack is manufactured with a hydrocarbon membrane to minimize the methanol crossover problem, which can be caused by use of high concentration methanol solutions. The stack is heated up for the cold start and operation only by heat of the exothermic reactions without any heating device and additional insulation means, to examine operation characteristics of the DMFC stack at low temperatures. The concentration of methanol solutions is selected in the range of 3-8 M, considering the freezing points of the solution for corresponding operation temperatures (-5 to -15 degrees C) Although the DMFC stack undergoes a sharp voltage drop and a significant performance decrease at the initial stage of the frozen condition, the self-heating DMFC are successfully operated at -5 and -10 degrees C in both constant current or constant voltage modes. The cold start-up time also is nearly independent of the operating modes. In contrast, the stack at -15 degrees C is barely started up only by a constant voltage mode with some voltage fluctuation. The DMFC stack after the cold operation exhibits the performance loss of about 45%. Such performance loss is mainly caused by degradation of the electrocatalysts. (C) 2010 Elsevier Ltd. All rights reserved.
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Engineering > Department of Materials Science and Engineering > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetrics

Total Views & Downloads

BROWSE